DBH 9656Vit radial shaft seal — 85 x 105 x 6.8/11
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9656Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9656Vit and any equivalents.
When a rotating shaft needs its lubricant kept in and outside contamination kept out, the DBH 9656Vit radial shaft seal is the part doing that job. It fits an 85 mm shaft in a 105 mm housing bore, with a height of 6.80/11.00 mm, and it follows the A 275-R design. Maintenance teams use it as a direct replacement on equipment that runs continuously and depends on a lip seal to protect bearings and gears.
The code breaks down simply: 9656Vit identifies the seal, while the numbers give you the fit. Shaft side measures 85 mm, bore side 105 mm, and overall height is 6.80/11.00 mm. The A 275-R designation describes a lip configuration with a reinforced body. Match all of these against the seal you are removing before you order.
You will find seals like this one in gearboxes, pumps, electric motors, line shafts and process machinery. Anywhere a shaft turns and oil or grease has to stay where it belongs, a lip seal is working. The same applies to agricultural equipment, conveyors and power transmission assemblies exposed to dust, water or metal chips.
Installation rewards a little care. Clean the shaft and bore, remove burrs and nicks, and coat the lip with the lubricant already used in the unit. Press the seal in square to the shaft, never striking the lip directly, and confirm it seats fully against any chamfer in the housing. Speed, temperature and the fluid being sealed all influence which seal suits the job.
If the dimensions match but the design does not, we can help. Send the 9656Vit code or the three measurements from the old seal, and we will look at equivalents from other series and brands. We can also tell you whether A 275-R is the right choice for your operating conditions.
MR Industrial Accessories LLC supplies the DBH line among its seals and oil seals. Send the code 9656Vit by WhatsApp or email and our team will come back with a quote, including special sizes or other sealing parts you may need.
Dimensions
- Shaft (d)
- 85mm
- Housing bore (D)
- 105mm
- Height (h)
- 6.80/11.00mm
- Design
- A 275-R
Frequently asked questions
- What size is the DBH 9656Vit oil seal?
- It suits an 85 mm shaft and a 105 mm housing bore, with a height of 6.80/11.00 mm under the A 275-R design. Compare these figures with the seal you are replacing before fitting.
- Where is this oil seal typically used?
- On rotating shafts in gearboxes, pumps, motors and transmission equipment, where it holds lubricant in and keeps dust or moisture out. It handles continuous rotation and moderately dirty or damp surroundings.
- How do I get a quote or an equivalent seal?
- Message us on WhatsApp or by email with the 9656Vit code or the shaft, housing and height measurements. We will quote the option that fits and, when needed, suggest an equivalent design.