DBH 9647/85 radial shaft seal — 19 x 32 x 6
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9647/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9647/85 and any equivalents.
The DBH 9647/85 is a radial shaft seal that keeps lubricant in and contaminants out of rotating shaft assemblies. It presses into the housing while a flexible lip runs against the shaft. You will find this type of seal in gearboxes, pumps, electric motors and other power transmission equipment. MR Industrial Accessories supplies this brand and helps you match the correct size.
This oil seal carries the DBH brand and the designation 9647/85. Its dimensions are shaft 19 mm, housing 32 mm and height 6.00 mm. The A 273 design indicates a single lip with a spring, intended for lubricated rotating shafts. The elastomer lip contacts the shaft, and the metal outer case holds the seal in the housing.
Seals of this kind appear in gearboxes, centrifugal pumps, electric motors, compressors, mixers and power transmission drives. They hold lubricant inside the assembly and block dust, water and chips from reaching the bearings. Because the lip wears over time, check the seal at each preventive maintenance interval.
During installation, clean the shaft and housing and remove any burrs or scratches. Apply the same oil or grease used in the equipment to the lip before fitting. Insert the seal squarely to the shaft and press it in evenly, without hitting the lip. If the shaft is worn, a seal with the lip in a different position may be an option. Speed, temperature and lubricant type all affect selection.
For an equivalent, send the code 9647/85 or the shaft, housing and height dimensions of your current seal. A photo of the part and the housing also helps. We compare your data against the manufacturer's data sheet to recommend a suitable option.
To request a quote for this DBH 9647/85 oil seal, contact us on WhatsApp or by email and mention the code. We will reply with the quote and possible alternatives. MR Industrial Accessories supplies power transmission components, seals and bearings. Ask us about this or other products.
Dimensions
- Shaft (d)
- 19mm
- Housing bore (D)
- 32mm
- Height (h)
- 6.00mm
- Design
- A 273
Frequently asked questions
- What are the dimensions of the DBH 9647/85 oil seal?
- It is a radial shaft seal with shaft diameter 19 mm, housing diameter 32 mm and height 6.00 mm. The design is A 273. These dimensions come from the designation and help identify the part for replacement.
- How do I know if this oil seal is compatible with my equipment?
- Confirm that the shaft is 19 mm, the housing is 32 mm and the axial space is 6.00 mm. Also review speed, temperature and lubricant type. If you are unsure, send us the data on WhatsApp and we will help you confirm compatibility.
- Can I replace this oil seal with one from a different brand?
- Yes, provided the dimensions and design type match. An equivalent seal must have the same shaft diameter, housing diameter and height, and suit the working conditions. Contact us and we will offer alternatives.