DBH 9515/85 radial shaft seal — 32 x 45 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9515/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9515/85 and any equivalents.
The DBH 9515/85 is a radial shaft seal built for rotating shafts. It keeps lubricant where it belongs, inside the housing, and blocks dust, water and particles from reaching bearings and gears. The Lx design uses a single lip with a spring. Shaft 32.00 mm, housing 45.00 mm, height 7.00 mm, so it suits gearboxes, pumps and motors where axial room is tight. MR Industrial Accessories supplies this brand.
Reading the code helps when you compare options. The 9515/85 number is the manufacturer's designation, and it does not carry over to other oil seals in the same series whose diameters differ. Treat it as a specific reference rather than a size family.
You will find this seal on gearboxes, centrifugal pumps, electric motors and other power transmission equipment. It sits on the shaft and inside a machined housing, with the elastomer lip riding against the shaft to hold oil or grease in place. That arrangement protects bearings from outside contamination while keeping lubrication at the point where it is needed.
During installation, check that the housing is clean and free of burrs and that the shaft surface finish is suitable. Press the seal in perpendicular to the shaft, without hammering that could distort the lip. Coat the lip with the same oil or grease the equipment uses before you seat it. If the shaft is worn, an oil seal with an auxiliary lip may be worth considering. Speed, temperature and fluid type all affect the choice, so confirm those values against the manufacturer's data sheet.
If you are after an equivalent, send the code 9515/85 or the dimensions of the original seal. A photo or the equipment drawing also works if you need help identifying the part. Our own manufacturing covers EMMAR brand housings, chains and sheaves, which gives us options when a standard size does not line up with what you need.
Dimensions
- Shaft (d)
- 32mm
- Housing bore (D)
- 45mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9515/85 oil seal?
- Shaft 32.00 mm, housing 45.00 mm, height 7.00 mm. These match the manufacturer's designation, so verify them against your equipment before ordering.
- What type of shafts is this oil seal used for?
- It is a radial shaft seal for rotating shafts with internal lubrication, such as those in gearboxes, pumps and motors. The Lx design with a single lip and spring retains oil or grease and keeps contaminants out.
- How do I request a quote or an equivalent?
- Send the code 9515/85 by WhatsApp or email. We can also work from the dimensions of the original seal or the shaft and housing measurements to find an equivalent.