DBH 9480Pol radial shaft seal — 40 x 60 x 10/11.5

DBH 9480Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9480Pol and any equivalents.

The DBH 9480Pol is a radial shaft seal that keeps lubricant where it belongs and keeps dust, water and other contaminants out of rotating assemblies. It seats on a 40 mm shaft inside a 60 mm housing bore, with a height of 10.00/11.50 mm, and it follows the A 209 design. Because the lip wears over time, this is a part you plan to replace during preventive maintenance on pumps, motors and gearboxes. MR Industrial Accessories supplies it within its seals and shaft seals range.

Start with the code: DBH is the brand and 9480Pol is the designation you quote. The dimensions read as shaft 40 mm, housing 60 mm, height 10.00/11.50 mm. The A 209 design points to a single lip with a spring, which is what holds oil or grease in place when rotation is moderate. The two height figures let the same seal sit in housings machined to different depths, provided the shaft and bore sizes match the nominal values.

You will find this seal in centrifugal pumps, electric motors, gearboxes, reducers and other power transmission equipment. Its job in each case is the same: keep the lubricant contained and stop dust, water or particles from reaching bearings and bushings and shortening their service life. It suits equipment running at medium shaft speeds where temperatures stay within the limits of the standard elastomer.

Selection and installation come down to a few checks. Confirm the shaft diameter falls inside the recommended tolerance and that the surface under the lip is smooth, with no scratches or worn spots. The bore should be clean and free of burrs, and the entry chamfer should be intact so the lip is not cut as it goes in. Coat the lip with the same oil the equipment uses, then press the seal with a support tube. When a seal has already failed, it is also worth checking shaft play and whether pressure is building up inside the crankcase.

If you are after an equivalent, send the complete seal part number along with the shaft, housing and height dimensions and a photo of the part. With those details we can search the DBH line or another brand we supply for a match. We can also tell you whether the A 209 design fits your working conditions or whether a different lip type or material deserves a look.

To get a quote on the DBH 9480Pol, send the part number by WhatsApp or email and the team will come back to you with replacement options for your equipment. Questions about selection, installation or compatibility are welcome as well.