DBH 9461 radial shaft seal — 35 x 72 x 10

DBH 9461 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9461 and any equivalents.

When a gearbox, pump or motor starts weeping oil around the shaft, the DBH 9461 is the kind of replacement part a maintenance team reaches for. This radial shaft seal measures 35.00 mm at the shaft, 72.00 mm at the housing bore and 10.00 mm in height, and it carries the Lx design. It sits press-fitted in the housing, with its lip riding on the rotating shaft to hold lubricant inside and keep dust, water and particles out of the assembly.

The part is referenced as DBH 9461, with 9461 as its numeric designation. Its published figures are: shaft 35 mm, housing 72 mm, height 10.00 mm, Lx design. In the Lx configuration, a single sealing lip is bonded to a metal case. The lip holds grease or oil on the lubricated side and blocks contamination coming from the exposed side, while a thin film of lubricant keeps it running against the shaft.

Seals in this size range turn up in reducers, electric motors, pumps, rollers and general power transmission equipment. The job is always the same: keep the oil where it belongs and keep dirt out, so bearings and gears are not damaged by contamination or starved of lubrication. Because the lip wears against the shaft, the seal is a consumable item, changed once leaking, contamination or unusual noise shows up.

Installation calls for a clean bore and shaft, free of burrs, nicks or scratches, with the shaft surface finished to the right hardness and roughness. Coat the lip with lubricant before pressing the seal in, and keep it square to the shaft rather than driving it in at an angle or striking the lip. Speed, temperature and lubricant type all affect how long the seal lasts, so if the old part carried a different design, review the operating conditions before substituting.

To check whether this seal fits your equipment, send the part number 9461 or the three dimensions together with a photo or sample of the worn seal. The brand and model of the machine also helps. With that information the size can be verified and the quote sent by WhatsApp or email.

MR Industrial Accessories LLC supplies the DBH brand and serves customers throughout the United States and in several Latin American countries. If 9461 is not the reference you need, message us with the part number or the measurements and we will point you to the right seal.