DBH 9372 radial shaft seal — 38 x 78 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9372 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9372 and any equivalents.
When a rotating shaft needs its lubricant held in and outside contamination kept out, the DBH 9372 radial shaft seal is a common answer. It fits a 38 mm shaft, a 78 mm housing bore and an 8 mm height, and it uses the Lx configuration: one sealing lip with a spring and no secondary dust lip. MR Industrial Accessories supplies this brand and helps you verify the size before you send a quote request.
The seal carries the designation 9372 within the DBH line. Reading the size is straightforward: shaft 38.00 mm (d), housing 78.00 mm (D), height 8.00 mm (h). The Lx design means a single spring-loaded lip works against the shaft while the outer diameter is press-fitted into the housing. It belongs to the seals and oil seals range that MR Industrial Accessories offers.
You will find a seal of these dimensions in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. Its job is always the same: keep oil or grease inside the assembly and block dust and moisture from getting in. Agricultural machinery, roller conveyors and process equipment with continuously rotating shafts are also typical hosts.
Installation rewards a little care. Inspect the shaft for burrs or worn areas and make sure the housing bore is clean and free of dents. Lubricate the lip before you slide the seal on, and drive it in with a tube that presses on the outer diameter, never on the lip. If the shaft already shows a wear groove, shifting the mounting position slightly can help; otherwise ask about another size. Lubricant type, speed and operating temperature all influence the final choice.
To find an equivalent, send the code 9372 along with the shaft, housing and height measurements you have on the equipment. With those three values we can search the same family or propose a seal with a different lip arrangement. Telling us the brand and model of the machine also makes the recommendation more precise.
MR Industrial Accessories stocks seals and oil seals in various brands and sizes. If the DBH 9372 looks like the right one, or if you want to confirm it suits your application, message us on WhatsApp or email with the code and dimensions. We will reply promptly with a quote and the options that fit.
Dimensions
- Shaft (d)
- 38mm
- Housing bore (D)
- 78mm
- Height (h)
- 8.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9372 oil seal?
- It is made for a 38.00 mm shaft, a 78.00 mm housing bore and an 8.00 mm height. The design is Lx, a radial shaft seal with a single lip and spring. Check these three values against your shaft and housing before ordering.
- How can I tell if this oil seal replaces the one I have?
- Measure the shaft diameter, housing diameter and height of the seal you are removing. If all three match the DBH 9372, it is a direct fit. If any value differs, contact us on WhatsApp with the equipment details and we will help you locate the right size in the same family.
- What should I watch for when installing a radial shaft seal?
- Clean the housing, confirm the shaft has no burrs or wear, and lubricate the lip before fitting. Use a tube or press that applies force to the outer diameter, not the lip. Keep the seal straight as it enters to avoid damage to the lip or casing.