DBH 9367 radial shaft seal — 36 x 72 x 8

DBH 9367 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9367 and any equivalents.

A radial shaft seal like the DBH 9367 keeps lubricant where it belongs and keeps contaminants out. It fits a 36 mm shaft, a 72 mm housing bore and an 8.00 mm height, and it carries the Lx design. Because it is a wear part, the usual sign that it needs attention is oil weeping from the housing or dirt working its way in. At that point, the replacement is another seal with the same designation.

The code tells you what you are holding: DBH 9367, with Lx indicating the design. On the data sheet, the bore dimensions read shaft 36 mm, housing 72 mm and height 8.00 mm. In the Lx configuration, a metal case holds a single sealing lip, which is the arrangement used on lubricated rotating shafts. DBH is one of the brands MR supplies, so before a quote goes out the 9367 number is checked against the catalog to confirm the geometry.

Seals in this size range turn up in gearboxes, pumps, electric motors, rollers and other power transmission assemblies. The job is always the same: hold the oil in and keep the working environment out of the bearings and gears. You also see them as a secondary closure on shafts running at moderate speed, or on equipment that sees dust or splashes. Where vibration or misalignment is present, inspect the shaft before pressing in a new seal.

Three checks matter before installation: the shaft diameter must sit within the recommended tolerance, the housing bore must be free of burrs and marks, and the seal height must match the depth available. Lubricate the lip first, then press on the case with a tube or spacer that applies even force. Never drive on the lip itself. A shaft with wear or a pronounced groove can defeat a correctly sized seal, in which case a wear sleeve or a seal with the lip in a different position is considered.

For an equivalent, the fastest route is to send the 9367 code together with the shaft and housing measurements. From there, an alternative from the same brand or from another brand MR supplies can be located, with the manufacturer's data sheet used to confirm it. A photo of the old seal and the housing also helps, since it shows the lip type, the case and the surface condition. The old seal does not need to be in good shape; more information means a faster answer.

To request a quote on the DBH 9367 oil seal, message us on WhatsApp or by email with the code and dimensions. MR Industrial Accessories handles seals and oil seals for industrial equipment and can point you to the option that suits the application. On a critical assembly, it is worth asking about the related bearing or bushing at the same time and checking the shaft before assembly.