DBH 9352 radial shaft seal — 25 x 48 x 8

DBH 9352 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9352 and any equivalents.

The DBH 9352 is a radial shaft seal that sits in the housing and presses against the rotating shaft, keeping lubricant in and dirt, water and particles out. Its size is shaft 25.00 mm, housing 48.00 mm, height 8.00 mm, and it uses the Lx design. This is a common size for gearboxes, pumps and electric motors, and MR Industrial Accessories supplies it as a brand.

The part number 9352 identifies this seal, and the three dimensions follow the usual order: d for the shaft at 25.00 mm, D for the housing bore at 48.00 mm, and h for the height at 8.00 mm. The Lx version is a single-lip seal with a metal outer case and an elastomer lip, made for lubricated rotating shafts. The case is press-fitted into the housing to form the static seal, while the lip rides on the shaft to form the dynamic seal.

Seals in this size range show up in gear cases, gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In each case the job is the same: hold oil or grease inside the assembly and keep outside contaminants from getting in. Because it is a wear part, it should be replaced once lubricant starts escaping or the contact area shows play or roughness.

During installation, check that the housing and shaft are clean and free of burrs or deep marks, and that the shaft surface has the hardness and finish a radial shaft seal needs. Put lubricant on the lip before pressing it in, and keep the seal square to the shaft instead of hitting it directly. If the shaft is worn, a design with an auxiliary lip may be worth considering. Speed, temperature and the working fluid all affect the final choice.

For an equivalent, send the 9352 part number along with the shaft and housing dimensions and a photo or sample of the seal you are replacing. With that information we can review options in the DBH line or from other brands we carry, keeping the dimensions and design type the same. We can also help if the housing has a shoulder or if the seal runs on a shaft with a lubrication groove.

To get a quote for the DBH 9352 oil seal, contact MR Industrial Accessories by WhatsApp or email with the part number and dimensions. We will come back with compatible options.