DBH 9332 radial shaft seal — 8 x 24 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9332 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9332 and any equivalents.
A radial shaft seal from DBH, the 9332 keeps lubricant where it belongs and keeps dust, water and particles out of the assembly. It fits a shaft of 8 mm, a housing bore of 24 mm and a height of 7 mm, and seats in the housing with a flexible lip running against the shaft. Equipment with low to medium demands relies on this type of seal to protect bearings and bushings from premature wear.
The designation itself tells you the geometry. Shaft 8.00 mm, housing bore 24.00 mm, height 7.00 mm. The Lx design is a single-lip seal with a spring, intended for rotating shafts. DBH is a brand we supply, so if you prefer to work with a different make, ask us about equivalents when you send your request.
Typical installations include gearboxes, pumps, electric motors, compressors and other transmission equipment where oil or grease has to stay contained. You will also find it in machine tools, washing equipment and conveyor systems. It suits shafts turning at moderate speeds, particularly where dust or moisture would otherwise reach the bearing cavity.
Selection comes down to matching three measurements: shaft, housing bore and height. The shaft surface should be ground and free of burrs, and the housing clean and undistorted. Lubricate the lip before pressing the seal in, use a proper installation tool, and keep eccentricity and axial play within the limits the manufacturer recommends.
Working from a sample or a housing measurement instead of a part number is common, and we can help identify the seal that way. If you already know the code 9332 or the dimensions 8x24x7 mm, send either one and we will take it from there. Our team also suggests equivalents and assists with choosing the right seal for the application. Quotes are handled through WhatsApp or email.
Dimensions
- Shaft (d)
- 8mm
- Housing bore (D)
- 24mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What size shaft and housing does the DBH 9332 fit?
- It is made for an 8.00 mm shaft and a 24.00 mm housing bore, with a 7.00 mm height. Confirm these three measurements against your shaft and housing before installing.
- Where is this oil seal commonly used?
- On rotating shafts in pumps, gearboxes, electric motors and compressors, as well as machine tools, washing equipment and conveyors. It retains lubricant and blocks contaminants under moderate speed conditions.
- How do I get a quote or an equivalent for the 9332?
- Send the code 9332 or the dimensions 8x24x7 mm by WhatsApp or email. We will quote the part and, if needed, look for an equivalent from another brand and help you confirm the choice.