DBH 9308 radial shaft seal — 30 x 60 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9308 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9308 and any equivalents.
The DBH 9308 is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It presses into the housing and its flexible lip runs against the shaft, tolerating minor misalignment. As a wear part, it is replaced when leakage or dirt ingress appears. MR Industrial Accessories LLC supplies this seal as part of its seal and oil seal line.
This seal carries the DBH brand and the code 9308. Its dimensions are 30 mm shaft diameter, 60 mm housing diameter and 7.00 mm height. The Lx design indicates a single sealing lip with an outer metal case, and no additional spring is shown in the designation. It is a compact component for machined housings held to controlled tolerance and shafts with a fine surface finish.
Typical uses include gearboxes, pumps, electric motors, transmission shafts and process equipment where rotation is continuous and oil or grease is present. It also suits environments with dust or splashing water, where the lip blocks contaminants from reaching the bearing or bushing. It is often found in food, chemical and water treatment plants, provided the lip material is compatible with the fluid.
During installation, confirm the housing is clean, free of burrs and at the correct diameter; the same applies to the shaft, which must not have splines or marks that could cut the lip. Lubricate the lip before insertion and use a support tube that presses on the case, never on the lip. If the shaft has play or misalignment, the seal will not seal correctly, so check the bearings before replacing the seal.
If you need an equivalent from another brand, send the code 9308 along with the shaft, housing and height dimensions. With that information we search the DBH line or the alternatives we supply. We can also advise if the Lx design is not right for your application and a different lip type or material is required.
MR Industrial Accessories LLC supplies the DBH brand within its seal and oil seal range. If you have the code, send it by WhatsApp or email and we will quote it. If not, provide the shaft and housing dimensions and we will help you identify the part.
Dimensions
- Shaft (d)
- 30mm
- Housing bore (D)
- 60mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9308 oil seal?
- It has a 30 mm shaft diameter, a 60 mm housing diameter and a 7.00 mm height. These are the dimensions in the manufacturer's designation. If your shaft or housing differs, send us the values and we will look for an alternative.
- What type of application is this oil seal suitable for?
- It is a radial shaft seal with a single lip, intended for rotating shafts in gearboxes, pumps, motors and lubricated equipment. It retains oil or grease and prevents dust or water from entering. Compatibility with the fluid and working temperature is confirmed according to the manufacturer's data sheet.
- How do I request a quote or an equivalent?
- Send the code 9308 by WhatsApp or email to MR Industrial Accessories LLC. If you do not have it, send the shaft and housing dimensions and the height, plus a photo of the old part if possible. With that we will quote the DBH oil seal or an alternative from the line we supply.