DBH 9283Vit radial shaft seal — 42 x 53 x 7

DBH 9283Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9283Vit and any equivalents.

The DBH 9283Vit is a radial shaft seal that sits in the housing bore and wipes against the turning shaft, holding lubricant in and keeping dust, water and particles out. With a 42 mm shaft, 53 mm housing and 7.00 mm height, it fits medium-sized assemblies. As a wear part, it gets replaced once leakage or contamination shows up. MR Industrial Accessories supplies it within its seals and oil seals range.

The item is identified by the designation 9283Vit. Its published values are shaft 42 mm, housing 53 mm and height 7.00 mm, and the stated design is Lx-R-H, which sets how the lip and body are built. It is a single-lip seal for lubricated rotating shafts. DBH is one of the brands MR supplies, so the replacement is ordered under this exact code.

Seals in this size range turn up in gearboxes, centrifugal pumps, electric motors, drive shafts and process equipment running 42 mm shafts. In every case the job is the same: retain oil or grease inside the assembly and block outside contaminants. They also appear in equipment exposed to water splash or fine dust, as long as the lip material suits the fluid and the operating temperature.

Before mounting, confirm the shaft is clean and free of burrs or marks, and that the sealing surface is not worn. The 42 mm figure refers to the shaft and the 53 mm figure to the housing, so both should be measured before replacement. Coat the lip with the same oil the equipment uses, then press the seal in square to the shaft without striking the lip. If the housing has a shoulder or the shaft shows play, review alternatives before installing.

For an equivalent, send the code 9283Vit together with the measurements taken on the machine: shaft diameter, housing diameter and height. That information is enough to locate an alternative in the same family or to confirm whether the Lx-R-H design is the correct one. Without the code on hand, a photo of the old seal plus the measurements also helps narrow the search within the DBH line.

To request a quote for this DBH 9283Vit seal, send the code to MR Industrial Accessories by WhatsApp or email. If the equipment is down, include the shaft and housing measurements so verification moves faster. MR supplies this brand as part of its seals and oil seals range and can help confirm the correct designation when the original code is no longer legible.