DBH 9251 radial shaft seal — 24.5 x 36 x 3.2
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9251 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9251 and any equivalents.
The DBH 9251 is a radial shaft seal built to keep lubricant in and contaminants out on rotating shafts. Its compact envelope—shaft 24.50 mm, housing 36.00 mm, height 3.20 mm—fits tight assemblies. The Ls design uses a single sealing lip without an extra shoulder, a common choice for lubricated rotating shafts.
This seal belongs to the DBH line and is identified by code 9251. The dimensions are shaft diameter (d) 24.50 mm, housing diameter (D) 36.00 mm and height (h) 3.20 mm. The Ls designation indicates a single-lip configuration without an additional shoulder. The 9251 number is the brand's own designation, so you can order the exact replacement by quoting it.
Typical uses include pumps, electric motors, gearboxes, compressors and transmission equipment where axial room is limited. You will also find it in machine tools, industrial fans and bearing arrangements that need protection from dust, water or chips. Because of its small size, it is common on low- and medium-power equipment with small-diameter shafts.
When mounting, confirm that the shaft and housing dimensions match the values above. Lubricate the lip before installation and press the seal in squarely, without hammer blows that could distort it. Peripheral speed, temperature and the fluid being sealed all affect selection; if your operating conditions fall outside the usual ranges, share the data with us and we will help you choose.
If you need an equivalent, send code 9251 or the dimensions of the seal you are replacing: shaft diameter, housing diameter and height. We can also look for alternatives in other brands or lip designs when an Ls profile does not suit your mounting. Our team can suggest equivalents and assist with selection.
MR Industrial Accessories supplies the DBH brand within its seals and oil seals range. To request a quote for the 9251, send the code on WhatsApp or by email and we will reply promptly.
Dimensions
- Shaft (d)
- 24.5mm
- Housing bore (D)
- 36mm
- Height (h)
- 3.20mm
- Design
- Ls
Frequently asked questions
- What are the dimensions of the DBH 9251 oil seal?
- The DBH 9251 has a shaft diameter of 24.50 mm, a housing diameter of 36.00 mm and a height of 3.20 mm. It uses the Ls single-lip design. Always verify these dimensions against your shaft and housing before mounting.
- Where is this oil seal typically used?
- It suits pumps, motors, gearboxes, compressors and other rotating-shaft equipment where lubricant must be retained and contaminants excluded. Its compact size helps in tight spaces. Final selection depends on speed, temperature and the working fluid.
- How do I request a quote or an equivalent?
- Send code 9251 to MR Industrial Accessories on WhatsApp or by email. For an equivalent, include the shaft, housing and height dimensions plus the application details. We will reply promptly with a compatible option.