DBH 9246Pol radial shaft seal — 98 x 116 x 10

DBH 9246Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9246Pol and any equivalents.

When a rotating shaft needs its lubricant kept in and outside contamination kept out, the DBH 9246Pol radial shaft seal is the part that does the job. It fits a 98 mm shaft, a 116 mm housing bore and a 10 mm height, and its Lx-R-AH construction pairs a sealing lip with an elastomer body and a metal reinforcing case. Maintenance teams use seals like this one in gearboxes, pumps, motors and power transmission assemblies. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your equipment.

The 9246Pol belongs to the DBH line of radial shaft seals. Reading the size is straightforward: shaft 98 mm, housing 116 mm, width 10 mm. The Lx-R-AH designation describes how the seal is built, with a lip, an elastomer body and a metal case that seats in a cylindrical housing bore. The lip rides against the rotating shaft, holding oil or grease inside while blocking dust, water and particles from entering. Because the lip wears against the shaft over time, the seal is a maintenance item that gets replaced periodically.

Seals in this size range show up in gearboxes, centrifugal pumps, electric motors, compressors, line shafts and process equipment. Their job is always the same: keep the lubricant on one side and the environment on the other, which in turn protects bearings and gears from premature damage. You will also find them in agricultural machinery, material handling equipment and hydraulic systems where a shaft turns inside a fixed housing. Speed, temperature and the fluid being sealed all influence which seal is the right choice.

Installation matters as much as selection. Confirm the shaft matches the specified dimension and that its surface is smooth, with no burrs or scratches that could cut the lip. Apply lubricant to the lip before pressing the seal in, and use a driver that contacts the outer diameter only, never the lip. The housing bore should be clean and free of deformation. If the application runs at high peripheral speed or elevated temperature, ask about other lip materials. Keeping the shaft and housing properly aligned helps the seal last longer.

To get a quote on the 9246Pol, send the code or the shaft and housing dimensions you measured. We compare it against alternatives from the DBH line and other brands we supply, and we can tell you if the Lx-R-AH configuration does not suit your mounting. Sharing details such as dimensions, fluid type, temperature and speed lets us give you a more accurate recommendation. Quotes are handled through WhatsApp or email, and our team responds promptly.

For a quote on the DBH 9246Pol seal, message us on WhatsApp with the code. Our team works through technical inquiries every day and can help you pin down the correct part for your equipment, including equivalent options when needed.