DBH 9208Pol radial shaft seal — 25.4 x 44.5 x 6.5

DBH 9208Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9208Pol and any equivalents.

For rotating shafts that need lubricant kept in and contaminants kept out, the DBH 9208Pol lip seal is a direct-fit option. It measures 25.40 mm at the shaft, 44.50 mm at the housing and 6.50 mm in height, so it drops into standard housings without modification. The elastomer compound stands up to oils and greases, and the Mx-Bidi lip geometry seals in both directions of rotation, including cases with alternating pressure. Maintenance teams keep this size on hand as a routine replacement.

The 9208Pol code belongs to the DBH seal line and identifies one specific size, not a family of similar seals. Reading the number correctly matters: other seals with close dimensions will not interchange. Shaft 25.40 mm, housing 44.50 mm, width 6.50 mm. The Mx-Bidi designation describes a lip arrangement that holds in either direction of rotation, with or without differential pressure across the seal. The elastomer resists mineral oils, greases and water and performs within the normal temperature range for radial lip seals.

You will find this seal in gearboxes, pumps, electric motors, transmission shafts and continuous-process equipment. It also appears in agricultural machinery, packaging lines, pumping skids and belt or chain drive systems. Its job is straightforward: stop lubricant from escaping and block dust, chips and liquids from entering, which is what shortens bearing and gear life. In oil- and grease-exposed locations, the DBH 9208Pol provides dependable sealing provided the shaft is in good condition and has the right surface finish.

Selection starts with confirming that shaft, housing and height match your equipment. Check the shaft for burrs, scratches or a wear groove; a rougher surface than specified will shorten lip life. At installation, coat the lip with the same oil or grease used in the machine, then press the seal squarely into the housing without hammering on the face. If the shaft already shows a groove, consider a repair sleeve or ask our technical team for guidance.

When you need a cross-reference, send the 9208Pol code or the dimensions you measured on the equipment. We compare the designation against alternatives from other brands and check dimensional and material compatibility. We can also help if the original seal uses a special configuration, such as an auxiliary or double lip. A photo of the part plus the equipment data lets us respond with suitable options.

To request a quote for the DBH 9208Pol seal, message us on WhatsApp with the code and the quantity required. Our sales team will confirm alternatives. MR Industrial Accessories supplies this brand and can also provide other seals and oil seals from the same line to complete your order. Send the code on WhatsApp and we will get back to you promptly.