DBH 9194Pol radial shaft seal — 63.5 x 98.45 x 3/15

DBH 9194Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9194Pol and any equivalents.

Sealing a rotating shaft comes down to matching the seal to the bore and the journal, and the DBH 9194Pol is built around a 63.50 mm shaft and a 98.45 mm housing. Its profile height reads 3.00/15.00 mm, meaning a thin flexible lip section paired with a deeper body that sits firmly in the bore. Design A 121 describes a single-lip radial seal with a reinforced outer body. MR Industrial Accessories supplies this seal and helps maintenance teams confirm it is the right fit before ordering.

The code 9194Pol identifies a radial shaft seal in the DBH line. Read the three figures in order: 63.50 mm is the shaft diameter the lip runs on, 98.45 mm is the housing bore it presses into, and 3.00/15.00 mm is the height split between the lip section and the full body. Design A 121 tells you the seal has one sealing lip and a heavier body section, which keeps it seated under vibration and side loads.

You will find this seal in gearboxes, pumps, electric motors and drive shafts, as well as in process equipment that runs continuously. In each case it holds oil or grease on the lubricated side and keeps dust, water and particles out. Treat it as a wear part: watch for weeping lubricant, staining around the bore or a change in noise at the seal area, and pull it for inspection when any of those appear.

Before ordering, confirm the journal measures 63.50 mm and the bore 98.45 mm, and check that the 15.00 mm body height clears the housing without forcing. During installation, coat the lip with the lubricant the equipment uses, keep the seal square to the bore, and check the shaft for burrs, nicks or a worn groove. A grooved journal may call for an offset lip or a repair sleeve rather than a direct replacement.

To quote the 9194Pol, send the designation along with the shaft, bore and height figures, plus a photo of the seal you are replacing. We match that data against the product information and suggest equivalent options in the same radial seal category, including other design A 121 variants or designs suited to your assembly. Quotes go through WhatsApp or email, and our team responds quickly.