DBH 9187/85 radial shaft seal — 22 x 32 x 7

DBH 9187/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9187/85 and any equivalents.

The DBH 9187/85 is a radial shaft seal built for a 22 mm shaft, a 32 mm housing bore and a 7 mm width. Its job is to keep lubricant where it belongs and to block dust, water and other particles from reaching bearings, bushings and gears. The seal presses into the housing, while a flexible lip rides on the shaft and absorbs minor misalignment. You will find it in pumps, electric motors, gearboxes and other transmission equipment that runs under demanding conditions.

This seal follows the A 016 design, and its dimensions are stated as shaft 22 mm, housing 32 mm and height 7.00 mm. The lip is made from an elastomer that stands up to mineral oils and greases, and the outer body normally has a metal case for a firm fit in the housing. The code 9187/85 tells you the lip geometry and type, which helps when you need to cross-reference a replacement.

Typical uses include gearboxes, centrifugal pumps, electric motors, compressors, transmission shafts and material handling equipment. In each case, the seal stops oil from leaking out and keeps contaminants from getting into the lubricant, which protects bearings and gears. It also works where dust or water is present, as long as peripheral speed and temperature stay within the elastomer's limits.

When selecting a seal, confirm that the shaft, housing and height match your equipment. The shaft surface should be ground and hard enough to avoid early lip wear. During installation, coat the lip with the same oil used in the equipment, press it in squarely with a mounting tool and do not strike it. If the shaft has a groove or wear, consider a repair sleeve or a different size.

If the exact size is not available or you need special features such as a double lip or a high-temperature material, get in touch. We can search for an equivalent from other brands that suits your application. Send the complete code, the shaft and housing dimensions, and a photo or sample of the original seal, and we will advise you with no obligation.

DBH is one of the seal and oil seal lines we supply. For a quote on the 9187/85 or any other sealing component, message us on WhatsApp or email. We can also help with installation and selection for your equipment.