DBH 9182/85 radial shaft seal — 26 x 38 x 7

DBH 9182/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9182/85 and any equivalents.

The DBH 9182/85 is a radial shaft seal built to keep lubricant in and contaminants out where a shaft turns. With a 26 mm shaft diameter, 38 mm housing diameter and 7 mm height, it fits gearboxes, pumps and small electric motors. MR Industrial Accessories supplies this brand and helps you match the seal to your equipment.

Reading the code is straightforward: the DBH 9182/85 designation is followed by the size trio. Shaft side measures 26 mm, housing bore measures 38 mm, and the overall width is 7.00 mm. Design A 016 identifies a single-lip seal with a spring, a common choice for rotating shafts that must hold oil or grease while blocking dust. It is a wear part often replaced during routine service.

Seals in this size range turn up in gearboxes, centrifugal pumps, electric motors, compressors and transmission rollers. Their job is to control lubricant at the point where the shaft passes through the housing, which helps protect bearings and keeps performance from dropping due to leakage.

When installing, confirm the shaft and bore match the stated dimensions, clean the shaft and remove any burrs, and take care not to nick the lip as you press the seal in. Apply lubricant to the lip before fitting and set the part square to the shaft. For high-speed or high-temperature service, contact us to review a suitable variant.

If you are cross-referencing, send the original part number, the shaft and housing dimensions, and a photo or sample. We use that information to find a compatible option from the lines we carry.

To request a quote for the DBH 9182/85 or another size, message us on WhatsApp or email with the part number and dimensions. We reply promptly and can suggest equivalents or help you choose.