DBH 9162/85 radial shaft seal — 17 x 32 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9162/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9162/85 and any equivalents.
The DBH 9162/85 is a radial shaft seal that sits in the housing bore and rides against the rotating shaft, holding lubricant in and keeping dust, water and particles out. It measures 17 mm at the shaft, 32 mm at the housing bore and 8.00 mm in height, and it is built in the Lr design. Gearboxes, pumps, electric motors and transmission equipment commonly use this kind of seal where a shaft exits a housing.
The code breaks down into the DBH line plus the reference 9162/85. Shaft 17 mm, housing bore 32 mm, overall height 8.00 mm. The Lr configuration means one sealing lip with a spring, intended for rotating shafts under permanent lubrication. The lip tracks the shaft surface and absorbs minor misalignment, while the outer body holds the seal firmly in the bore.
Seals in this size range turn up wherever an input or output shaft has to be closed off: gear reducers, centrifugal and positive displacement pumps, electric motors, compressors, mixers and conveyors. Machine tools and process equipment use them as well, since keeping oil or grease inside and contaminants outside slows wear on bearings and gears.
Before ordering, confirm that shaft diameter, housing bore and height match the data sheet values. The shaft surface should be ground and free of burrs. Lubricate the lip before pressing the seal in, and use a sleeve or driver so the spring does not roll out of position. On equipment that runs hot or vibrates heavily, it is worth reviewing the lip compound and spring type available in the series.
To get a quote, send the complete code together with the dimensions of the seal you are replacing. Shaft diameter, housing bore and height are enough for us to search the DBH line or another brand we supply. We can also weigh in when the shaft is worn or the housing has a shoulder that could interfere with seating.
Dimensions
- Shaft (d)
- 17mm
- Housing bore (D)
- 32mm
- Height (h)
- 8.00mm
- Design
- Lr
Frequently asked questions
- What size is the DBH 9162/85 oil seal?
- Shaft 17 mm, housing bore 32 mm, height 8.00 mm. Compare these three values against your equipment before requesting a quote.
- Where does this seal fit?
- It suits rotating shaft positions in gearboxes, pumps, electric motors and transmission equipment. The Lr lip with spring holds lubricant in and blocks dust or water at the point where the shaft passes through the housing.
- How do I ask for an equivalent?
- Send the code of the original seal plus the shaft, housing bore and height dimensions by WhatsApp or email. With that information we look for an alternative in the DBH line or another brand we supply and reply with the quote.