DBH 9132 radial shaft seal — 28 x 52 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9132 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9132 and any equivalents.
A radial shaft seal like the DBH 9132 sits between a turning shaft and a stationary housing. Its job is to hold lubricant in and keep dust, water and particles out. The 28 mm shaft, 52 mm housing and 7 mm height, combined with the Lx design, make it a common choice for gearboxes, pumps, electric motors and power transmission equipment running at moderate speeds. MR Industrial Accessories supplies this brand and helps you match the seal to your application.
The item belongs to the DBH line and carries part number 9132. Reading the code is straightforward: the dimensions tell you where it fits, and the Lx designation tells you what kind of sealing element you are getting. Lx means a single lip with a spring, built for rotating shafts that run with lubrication. The lip rides against the shaft while the outer diameter seats with interference in the housing bore.
You will find seals of this size in gearboxes, centrifugal pumps, electric motors, conveyor rollers and other power transmission assemblies. Whatever the machine, the function stays the same: retain oil or grease and block contaminants. Some users also fit them as a secondary seal in split plummer block housings or in machine tools where a shaft turns inside a housing.
Installation calls for a few basic checks. The shaft should be free of burrs and wear, and the housing bore clean and undented. Coat the lip with the same oil or grease the equipment uses, then press the seal in with a support tube that contacts the outer diameter, never the lip. A deep groove on the shaft may call for an offset lip instead.
Selection comes down to speed, temperature and lubricant type. If you are looking for an equivalent, send part number 9132 along with the shaft, housing and height dimensions and the equipment brand. A photo of the old seal or the assembly drawing also helps. From there we can search the DBH line and other compatible options, and if Lx is not the right fit we will suggest the variant that seals best in your conditions.
MR Industrial Accessories carries the DBH brand within its seals and oil seals range. To request a quote, send part number 9132 and the dimensions by WhatsApp or email. Our team replies promptly and can suggest equivalents or help you choose.
Dimensions
- Shaft (d)
- 28mm
- Housing bore (D)
- 52mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9132 oil seal?
- Shaft 28.00 mm, housing 52.00 mm, height 7.00 mm. These are the values shown in the designation and they are what you use to identify the exact replacement. If your shaft or housing measures differently, ask us about an alternative.
- What type of application is the Lx design suitable for?
- Lx is a single-lip seal with spring, made for rotating shafts that operate with lubrication. Gearboxes, pumps and motors are typical. For high speed, high temperature or dusty conditions, it is worth reviewing another sealing variant.
- How do I request a quote for the DBH 9132 oil seal?
- Send part number 9132 by WhatsApp or email to MR Industrial Accessories, together with the shaft, housing and height dimensions. A photo of the old seal helps confirm the design. We will quote the option and, if needed, an equivalent size.