DBH 9115 radial shaft seal — 36 x 46 x 5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9115 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9115 and any equivalents.
For rotating shafts that need reliable sealing, the DBH 9115 oil seal offers a 36 mm shaft fit, a 46 mm housing fit and a 5.00 mm height. It keeps lubricant where it belongs and blocks dust, water and other contaminants from reaching bearings and gears. Pressed into the housing, this radial shaft seal is a common wear part in motors, pumps, gear reducers and transmission cases.
The DBH 9115 follows an Lx design: one sealing lip, metal outer body. Reading the size code is straightforward: shaft 36 mm (d), housing 46 mm (D), height 5.00 mm (h). The elastomer lip rides on the rotating shaft while the outer ring holds the seal in the housing. Within the DBH line, 9115 identifies this metric combination. It is a standard radial shaft seal, not a double-lip version or a mechanical seal.
You will find this type of seal on electric motor shafts, centrifugal pumps, speed reducers, gearboxes and power transmission equipment, as well as in machine tools, compressors and conveying systems. It serves two purposes at once: no oil or grease escapes, and no contaminants get in to wear down bearings and gears. Where dust, chips or moisture are present, a healthy seal directly affects how long the equipment lasts.
When choosing a replacement, match the shaft, housing and height dimensions to the original seal. The shaft diameter must sit within the tolerance the lip requires; a scratched or worn shaft can leak even with a new seal. At installation, coat the lip with the same oil or grease used in the equipment, keep it perpendicular to the shaft, and apply force only to the outer ring, never to the lip. Remove any burrs or damage in the housing first.
If the exact size is hard to find or you need an equivalent, send us the full part number (DBH 9115), the shaft, housing and height dimensions, and a photo or sample of the old seal if you have one. We can also advise on lip type and material based on the fluid and working temperature. The DBH brand is part of our seals and oil seals line.
To request a quote for the DBH 9115 oil seal, message us on WhatsApp with part number 9115 and the dimensions. We will reply with the options that fit your equipment.
Dimensions
- Shaft (d)
- 36mm
- Housing bore (D)
- 46mm
- Height (h)
- 5.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9115 oil seal?
- Shaft 36 mm, housing 46 mm, height 5.00 mm. These are the values tied to designation 9115, and you should confirm them against the old seal before replacing it.
- How do I check if the DBH 9115 fits my equipment?
- Measure the original seal: shaft diameter, housing diameter and height. A match with 36 x 46 x 5 mm means the DBH 9115 will fit. Also inspect the shaft and housing, since wear there can affect sealing.
- Can I ask for an equivalent size without the part number?
- Yes. Send us the seal dimensions or a photo of the original on WhatsApp. We can help you locate a suitable replacement within the DBH line or other brands we carry.