DBH 9110 radial shaft seal — 32 x 45 x 10

DBH 9110 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9110 and any equivalents.

The DBH 9110 is a radial shaft seal with a single lip, sized for a 32 mm shaft, a 45 mm housing bore and a 10 mm overall height. Its Lx design uses a single sealing lip held in an outer metal case, the standard press-fit style for rigid housings. In gearboxes, pumps, motors and other rotating equipment, this seal keeps lubricant in and keeps dust and water out of the bearing area.

Part number 9110 belongs to the DBH line of radial shaft seals. The size callout is shaft 32 mm, housing 45 mm, height 10 mm. The Lx designation indicates one sealing lip with an outer metal case, a format intended for pressing into a solid housing. An internal spring keeps the lip in contact with the shaft as it turns.

Seals of this size turn up in gearboxes, centrifugal pumps, electric motors, spindles, and belt or chain drives. They do two jobs: hold oil or grease inside the assembly and block dust, chips or water from entering. When a seal sits next to a bearing, its condition affects how long the bearing lasts and how clean the lubricant stays.

For installation, make sure the shaft is clean and free of burrs or deep marks in the contact zone, and that the housing bore is not dented. Lubricate the lip before pressing it in, and use a support tube that pushes on the outer diameter, never on the lip. If the shaft is worn, a seal with the lip in a different position may be an option. Final selection depends on speed, temperature and the lubricant in the equipment.

To request a quote for part number 9110, send the shaft, housing and height dimensions, or a drawing or photo of the old seal. With that information we can review alternatives in the DBH line and from other brands we supply. If the seal is part of an assembly with bearings, we can also help you check that the choice fits the rest of the system.

MR Industrial Accessories supplies the DBH brand. If the DBH 9110 oil seal matches your needs, message us on WhatsApp with the part number and we will provide a quote. If you are unsure about the size, send the shaft and housing dimensions and we will help confirm the replacement.