DBH 9087 radial shaft seal — 15 x 38 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9087 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9087 and any equivalents.
The DBH 9087 is a radial shaft seal built to hold lubricant in place where a shaft turns inside a housing, and to keep dust and other outside particles from working their way in. It suits gearboxes, pumps, electric motors and similar power transmission equipment that runs on a 15 mm shaft. The Lx designation identifies a single-lip seal with a spring, made for rotating shafts under normal lubrication.
The code 9087 belongs to the DBH line of radial shaft seals. Read the size as shaft 15.00 mm, housing 38.00 mm, height 7.00 mm. Lx means a single lip with a retaining spring on a metal body. Before you pull an old seal, confirm those three measurements against the shaft and the bore.
Seals in this size range show up on low and medium speed transmission shafts: gearboxes, centrifugal pumps, electric motors, compressors, mixers, machine tools, plus rollers and conveyor shafts. The job is the same everywhere: hold the lubricant inside the assembly and limit the contaminants that shorten the life of bearings and gears.
Selection starts with the shaft. The lip contact area should be free of burrs and deep marks, with the right hardness and surface finish. The bore has to be clean, undamaged and at the correct diameter. Lubricate the lip with the same oil or grease the equipment uses, press the seal in squarely, and never drive it in from one side with a hammer. A worn shaft may call for a seal with an offset lip instead.
If you are cross-referencing the 9087 to another brand, send the equipment details along with your measured dimensions. We handle several seal and oil seal lines and can point you to the closest match. The more complete the information, the more useful our answer will be.
For a quote on the DBH 9087, or to ask about a different size, message us on WhatsApp or by email with the code 9087 and your shaft and housing dimensions. We will reply with the quote for that reference and, when it helps, with equivalent options.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 38mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 9087 seal?
- It is a 15.00 mm shaft, 38.00 mm housing, 7.00 mm height radial shaft seal with an Lx design. Check all three against the shaft and bore of your equipment before ordering.
- Where does this seal normally go?
- On rotating shafts that need lubricant retained and dust excluded, such as gearboxes, pumps, electric motors, compressors and transmission machinery. At 15 mm it is a small size, common on lighter shafts.
- How do I ask for an equivalent?
- Send the code 9087 by WhatsApp or email together with the shaft and housing dimensions and details or a photo of the equipment. Our team will look for an alternative within the seal lines we supply.