DBH 9052 radial shaft seal — 18 x 28 x 7

DBH 9052 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9052 and any equivalents.

Part 9052 is a radial shaft seal from the DBH line, built to hold lubricant in place and keep dust and water out where a shaft turns inside a housing. Its dimensions are 18 mm at the shaft, 28 mm at the bore and 7.00 mm in height, in the Lx design. Gear reducers, pumps, electric motors and transmission equipment are common homes for a seal this size. MR Industrial Accessories supplies this brand and can verify the size before you request a quote.

The Lx design refers to a seal with a sealing lip and a metal case. In service it does two jobs at once: it retains oil or grease on the bearing side and blocks contaminants on the outside. Because it is a wear part, it gets replaced once leakage or dirt entry shows up, not before.

This size shows up in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment, as well as machine tools, gear reducers and fan shafts. The function stays the same everywhere: lubricant stays in, dust, water and particles stay out of the bearing or gear. The seal itself costs little compared with the parts it protects.

Before fitting, inspect the shaft for burrs or wear and make sure the bore is clean and free of marks. Coat the lip with the same oil or grease the equipment uses, then press the seal in with a flat driver so it does not deform. Speed, temperature and lubricant type all affect selection; share those details and we can check them against the manufacturer's data. A seal of the wrong size will leak even when new.

If 9052 is not the reference you need, we can search for an equivalent in the same DBH line. Send the shaft diameter, bore diameter and height of the old seal by WhatsApp, or a photo showing the engraved number. With that information we identify the reference that matches in dimensions and design and return your quote.

MR Industrial Accessories supplies the DBH brand. If 9052 is the seal you need, message us by WhatsApp or email with the part number and we will quote it. If you are unsure, send the dimensions and we will help confirm the replacement.