DBH 9007 radial shaft seal — 140 x 165 x 14

DBH 9007 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9007 and any equivalents.

The DBH 9007 is a radial shaft seal in the Lx design, a lip seal with a spring that fits into a housing to keep lubricant in and contaminants out of equipment with rotating shafts. Its dimensions are a 140 mm shaft, a 165 mm housing bore and a 14 mm width. You will find it in gearboxes, pumps, electric motors and process machinery, where proper sealing protects bearings and avoids oil loss.

This seal is identified by the 9007 code within the DBH line. The size is given as shaft 140 mm, housing 165 mm, width 14.00 mm. The Lx design means a radial shaft seal with a sealing lip and a spring, made for lubricated rotating shafts. It is a direct replacement for equipment already using this size, and its job is to hold lubricant inside the assembly while blocking dust, water and particles.

Typical uses include gearboxes, speed reducers, centrifugal pumps, large electric motors and transmission equipment. In each case the seal runs on a shaft that turns inside a fixed housing, and the lip must stay in contact to seal. You will also find it in machine tools, mining equipment and process plants where keeping lubricant clean is important for bearing life.

For installation, check that the shaft is 140 mm and the housing bore is 165 mm, with at least 14 mm of depth. The shaft surface should be ground and free of burrs, and the housing clean and undamaged. Lubricate the lip before fitting, then press the seal in with a suitable tool, applying even force on the outer ring. Do not hit the lip or the spring. If the shaft is worn, consider a repair sleeve or a different size.

If you need an equivalent, send the 9007 code or your equipment dimensions. We can advise on alternatives within the DBH line or other brands we supply, and help you confirm the correct size if you are unsure about the shaft or housing diameter. Quotes are provided with no obligation, and we help you get the right part.

To request a quote for the DBH 9007 oil seal, contact us via WhatsApp or email with the 9007 code or the dimensions 140x165x14 mm. We reply promptly with the quote and suitable alternatives for your equipment.