DBH 9004 radial shaft seal — 120 x 160 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9004 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9004 and any equivalents.
A radial shaft seal from the DBH line, the DBH 9004 keeps lubricant inside the housing and keeps dust, water and particles out. Its designation already carries the size: 120.00 mm at the shaft, 160.00 mm at the housing bore, 12.00 mm in height. MR Industrial Accessories supplies this seal as part of its seals and oil seals range for customers in the United States and Latin America.
The DBH 9004 uses the Lx design, which means a sealing lip carried on a metal body. The body is pressed into the housing bore and stays fixed there, while the lip rides against the rotating shaft. Shaft 120.00 mm, housing 160.00 mm, height 12.00 mm. It is a standard replacement item, so the same size is normally found in the seals and oil seals category.
Typical mounting points are gearboxes, pumps, electric motors, rollers and other transmission equipment where a shaft turns inside a housing and oil or grease has to stay contained. The seal also works as a barrier in areas where dust or splashes are present. The size suits medium-sized industrial machinery and equipment that runs continuously.
Before ordering, confirm that shaft diameter, housing bore and height agree with the DBH 9004. The shaft surface matters as much as the size: a scratched or worn shaft prevents the lip from sealing properly even when the dimensions are right. Lubricate the lip before pressing the seal in, keep it perpendicular to the shaft, and remove any burrs from the housing bore beforehand.
If you are quoting an equivalent, send the part number stamped on the old seal, the shaft and housing dimensions, and a photo. That is usually enough to find a match in the DBH line or in another brand we supply. A drawing or data sheet of the equipment also helps, particularly when the original seal can no longer be identified.
To request a quote for the DBH 9004, send the part number by WhatsApp or email. If you are unsure about the design or the lip material, say so in the message and the team will check it against the manufacturer's information and help you choose the right replacement.
Dimensions
- Shaft (d)
- 120mm
- Housing bore (D)
- 160mm
- Height (h)
- 12.00mm
- Design
- Lx
Frequently asked questions
- How do I know if the Lx design is the one I need?
- Lx describes the configuration: a sealing lip on a metal body for press fitting. If the old seal has a similar shape and the dimensions match, Lx is generally the replacement. Send a photo of the old seal and we will compare it with the data sheet.
- Can I request a size other than the DBH 9004?
- Yes. Send the shaft, housing and height dimensions you need by WhatsApp or email and we will look for the alternative in the DBH line or in other brands we supply. We can also check equivalences against the part number of the original seal.
- What are the dimensions of the DBH 9004 seal?
- Shaft 120.00 mm, housing 160.00 mm, height 12.00 mm. These are the nominal dimensions in the designation and in the manufacturer's data sheet. Verify them against the old seal or the equipment drawing before ordering.