DBH 8993 radial shaft seal — 105 x 130 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8993 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8993 and any equivalents.
The DBH 8993 is a radial shaft seal with an Lx design, sized for a 105 mm shaft, a 130 mm housing bore and a 12.00 mm height. It keeps lubricant in and contaminants out of rotating equipment. MR Industrial Accessories supplies this seal and quotes it on WhatsApp.
This seal uses the DBH code 8993 and follows the Lx configuration: a single sealing lip on a metal case. It is a rotary sealing element, not a bearing or bushing. Press it into the housing cavity with the lip facing the fluid side. The three critical dimensions are shaft 105 mm, housing 130 mm and height 12.00 mm.
You will find seals of this size in gearboxes, centrifugal pumps, mixers, chain conveyors and other power transmission assemblies. Their job is to hold oil or grease inside and block dust, water and particles from entering. Because the lip wears against the shaft, the seal is a maintenance item, replaced on schedule or when lubricant starts to escape.
When choosing a replacement, confirm the shaft diameter, housing bore and available height. Also inspect the shaft surface: a groove or deep mark on the sealing track will cause leaks even with a new seal. During installation, coat the lip with the same oil or grease used in the equipment, keep the seal perpendicular to the shaft and avoid striking the lip. Remove any burrs from the housing before pressing the seal in.
To request a quote for code 8993, send the dimensions 105 x 130 x 12. If your application calls for a different lip style or housing, we can help you identify the right alternative. Our team handles technical inquiries so the replacement fits correctly rather than being forced.
MR Industrial Accessories supplies this DBH seal. For a quote, message us on WhatsApp with code 8993 and we will provide the technical details you need for your equipment.
Dimensions
- Shaft (d)
- 105mm
- Housing bore (D)
- 130mm
- Height (h)
- 12.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8993 seal?
- The DBH 8993 seal has a 105 mm shaft diameter, a 130 mm housing diameter and a 12.00 mm height. The design is Lx. These values let you check compatibility with your equipment.
- How can I tell if this seal replaces the one I have?
- Compare the shaft diameter, housing diameter and height of your old seal with the 8993 values. If they match, it is likely compatible. Also check the shaft condition: a worn track can prevent proper sealing.
- Can I request a size different from the 8993?
- Yes. Send us the dimensions you need or the original seal code on WhatsApp and we will quote an alternative. We can look for an equivalent within the seal lines we supply.