DBH 8915 radial shaft seal — 54 x 68 x 10

DBH 8915 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8915 and any equivalents.

The DBH 8915 is a radial shaft seal that fits over the shaft and seals against the housing bore, keeping lubricant in and dirt, water and particles out. With an Lx design and a 54 mm shaft, 68 mm housing and 10 mm height, it suits rotating equipment and power transmission setups where there is not much room along the shaft. MR Industrial Accessories supplies this brand and can help confirm the size before you ask for a quote.

This seal belongs to the DBH line and carries the code 8915. Its published figures are: shaft 54 mm, housing 68 mm, height 10 mm, Lx design. Lx refers to a single-lip seal with a spring, made for rotating shafts that run with continuous lubrication. The 8915 number is the manufacturer's commercial designation, so it pays to compare it against the actual shaft and housing measurements before you order.

You will find this type of seal in gearboxes, pumps, electric motors, rollers and power transmission equipment, wherever a shaft passes through a cover or housing and needs sealing. It also shows up in conveyors, agricultural machinery and process equipment that run on oil or grease. In each case it does two jobs: it keeps lubricant from leaking out and keeps contaminants from working their way in.

When installing, check that the shaft is the right size and finish, with no burrs or marks that could cut the lip. The housing bore should be clean and at the correct diameter; a seal that goes in crooked will not seat its lip evenly. Coat the lip with the same oil or grease the equipment uses before fitting it, and avoid striking it with sharp tools. If the shaft is worn, a seal with the lip sitting in a different position may be the better choice.

For an equivalent, send the code 8915 together with the shaft, housing and height dimensions. It also helps to tell us which equipment it is mounted on and to include a photo of the old part. With that information we review options in the DBH line or from other brands we carry, checking them against the manufacturer's data sheet before quoting.

MR Industrial Accessories supplies the DBH brand. If the 8915 is the seal you need, or if you would like us to locate an equivalent size, message us on WhatsApp with the code and dimensions. We will get back to you with the quote and the options.