DBH 8911 radial shaft seal — 48 x 68 x 10

DBH 8911 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8911 and any equivalents.

The DBH 8911 is a radial shaft seal that keeps lubricant in and contaminants out where a shaft passes through a housing. Its flexible lip presses against the shaft, tolerating minor misalignment, and the seal is press-fitted into the housing. As a wear part, it is replaced when oil loss or dirt ingress appears. MR Industrial Accessories LLC supplies this seal as part of its seals line.

This seal carries the code DBH 8911 and the Lx design, which indicates a single lip with a spring for rotating shafts that run with lubrication. The three dimensions to verify are shaft 48 mm, housing 68 mm and height 10 mm. The 8911 code fixes the exact size in the DBH line, so always compare these three values against the seal you are removing before ordering.

Typical applications include gearboxes, pumps, electric motors, mixers and other power transmission equipment where a shaft exits a crankcase. The seal also appears in agricultural machinery, conveyors and process equipment. In every case the job is the same: hold oil or grease on the inside and block dust and water from the outside, protecting bearings and gears.

When selecting a replacement, confirm that the shaft and housing diameters match the original. Lubricate the lip before installation and check that the shaft is free of burrs or deep marks in the contact zone. If the shaft is worn, a repair sleeve or a seal with the lip in a different position may be needed. The 10 mm height must seat in the housing without being forced.

To request a quote for code 8911, send the dimensions of the old seal—shaft diameter, outer diameter and height—along with a photo if available. With that information we can locate an equivalent in the DBH line or another brand of the same quality. We can also provide the same seal type in other dimension combinations within the line.

For a quote on the DBH 8911 oil seal, contact us via WhatsApp with the code and the quantity you need. MR Industrial Accessories LLC serves the industrial sector and can help you confirm the correct part. If you are unsure between two sizes, ask us before purchasing.