DBH 8907 radial shaft seal — 55 x 65 x 9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8907 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8907 and any equivalents.
The DBH 8907 is a radial shaft seal built to keep lubricant in and contaminants out of rotating equipment. With a 55.00 mm shaft diameter, 65.00 mm housing bore and 9.00 mm height, it fits common gearboxes, pumps and electric motors. MR Industrial Accessories supplies this brand and helps you match the right seal to your application.
This seal carries the DBH brand and the code 8907. Its dimensions are shaft 55.00 mm, housing 65.00 mm and height 9.00 mm. The Lx design denotes a single lip with spring, intended for rotating shafts that run with lubrication. The elastomer lip rides against the shaft to hold oil or grease in place and to block dust, water and particles from entering.
You will typically find a seal of these dimensions in gearboxes, centrifugal pumps, electric motors, reducers and transmission equipment. It presses into the housing and seals against the rotating shaft, shielding internal bearings and gears. Because it is a wear part, replace it when leaks appear or when the equipment starts making abnormal noise.
When selecting this seal, confirm that the shaft, housing and height match your equipment. The Lx design suits moderate speeds and low pressures. During installation, lubricate the lip with the same oil or grease used in the application, press the seal in perpendicular to the shaft, and keep burrs or sharp tools away from the lip. If the shaft is worn, a repair sleeve is an option.
If you need a cross-reference to another brand, contact us via WhatsApp or email. We can search our seals and oil seals for alternatives that respect the critical dimensions of your equipment. MR Industrial Accessories supplies bearings, mounted units, power transmission parts, seals, lubrication and maintenance tools, and manufactures split plummer block housings, roller chains and sheaves.
To request a quote for the DBH 8907 oil seal or a replacement, send the code 8907 via WhatsApp or email. We reply promptly with the quote and compatible options, and we can advise on installation and precautions to help you get the most from the seal.
Dimensions
- Shaft (d)
- 55mm
- Housing bore (D)
- 65mm
- Height (h)
- 9.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8907 oil seal?
- The DBH 8907 oil seal has a 55.00 mm shaft diameter, a 65.00 mm housing diameter and a 9.00 mm height. These dimensions must match your equipment's shaft and housing for correct sealing.
- What does the Lx design mean in this oil seal?
- The Lx design is a radial shaft seal with a single lip and spring, suitable for rotating shafts with lubrication. Check that the direction of rotation and operating conditions are compatible with this design to avoid premature leaks.
- How do I request a quote or an equivalent?
- Write to us via WhatsApp or email with the code 8907 or the dimensions you need. We quote the DBH 8907 oil seal and look for an equivalent from another brand that fits your application.