DBH 8895 radial shaft seal — 40 x 58 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8895 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8895 and any equivalents.
The DBH 8895 is a radial shaft seal that sits between a rotating shaft and a stationary housing. It keeps lubricant in and keeps dust, water and other particles out. The seal is built for a 40.00 mm shaft, a 58.00 mm housing bore and a 7.00 mm height, and its Lx design means a single lip with a spring. You will find it in gearboxes, pumps, electric motors and power transmission equipment where bearings need protection and leaks must be avoided.
This radial shaft seal comes from the DBH brand and carries the part number 8895. The dimensions are shaft 40.00 mm, housing 58.00 mm, width 7.00 mm. The Lx designation points to a single lip with a spring, made for rotating shafts that run with lubrication. It is a standard replacement item when the original seal has reached the end of its service life.
Seals of this size show up in gearboxes, centrifugal pumps, electric motors, mixers and conveyors. They also appear in chain or belt drive equipment, where the seal blocks oil from escaping and stops dust from reaching the bearing. In every case, the seal works against a machined shaft and a housing with a suitable surface finish.
During installation, make sure the shaft is free of burrs or wear and that the housing is clean and has no dents. Apply the same grease or oil used in the equipment to the lip before pressing the seal in. Use a tube or press that contacts the outer diameter only, never the lip. If the shaft has a deep groove, a design with an auxiliary lip may be a better choice. Final selection depends on speed, temperature and the working fluid.
To get a quote for part number 8895, send the shaft, housing and height dimensions. A photo of the old seal or the equipment drawing also helps. With that information we review options within the DBH line and other brands we carry, and send you a quote. The seal does not have to be in our catalog for us to source it.
MR supplies the DBH brand as part of its seals and oil seals range. If the 8895 is the seal you need, contact us on WhatsApp with the part number and dimensions. We will reply with a quote and replacement options if needed.
Dimensions
- Shaft (d)
- 40mm
- Housing bore (D)
- 58mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- How do I request a quote for the 8895 seal?
- Send part number 8895 by WhatsApp to MR. If possible, include a photo of the old seal or the shaft and housing dimensions. We will then send you the quote and, if needed, equivalent alternatives within the DBH line.
- Does it work on worn or grooved shafts?
- If the shaft has a deep groove where the lip used to run, the new seal may not seal correctly. In that case, a design with an auxiliary lip is often a better fit. Contact us with the dimensions and the shaft condition so we can review the best option.
- What are the dimensions of the DBH 8895 seal?
- The DBH 8895 seal has a 40.00 mm shaft diameter, a 58.00 mm housing diameter and a 7.00 mm height. The design is Lx, with a single lip and spring. These dimensions match the 8895 designation.