DBH 8888 radial shaft seal — 28 x 52 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8888 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8888 and any equivalents.
The DBH 8888 is a radial shaft seal with a single lip, sized for a 28 mm shaft, a 52 mm housing bore and a 10 mm width. It keeps lubricant in and contaminants out of gearboxes, pumps, motors and other rotating equipment. MR Industrial Accessories LLC supplies this seal as part of its seals and oil seals line for customers in the US and Latin America.
This seal carries the DBH designation and part number 8888. Its Lx configuration means a single sealing lip, which suits assemblies where axial room is tight and a reliable barrier against oil or grease loss is needed. The three dimensions to match are shaft 28 mm, housing 52 mm and width 10 mm.
You will find seals like the DBH 8888 in gearboxes, centrifugal pumps, electric motors, spindles and bearing arrangements. The seal holds lubrication inside the housing and blocks dust, water and particles that could harm bearings or the shaft. Industrial plants, workshops and agricultural machinery commonly use this type of seal.
When selecting a replacement, confirm that the shaft, housing and width match your equipment. The shaft surface should be ground and hard enough to avoid early lip wear. During installation, coat the lip with the same oil or grease used in service, press the seal in perpendicular to the shaft, and avoid impacts that could deform the lip.
If you need an equivalent, our team can help. We offer alternatives from other brands and can search for the size that fits your application. Sending the original part number, the shaft and housing dimensions, and a photo of the old seal helps us advise you accurately.
To request a quote for the DBH 8888 oil seal, contact us by WhatsApp or email. Send the part number and dimensions, and we will reply promptly. We also assist with choosing the right seal or suggesting equivalents when needed.
Dimensions
- Shaft (d)
- 28mm
- Housing bore (D)
- 52mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8888 oil seal?
- The DBH 8888 oil seal has a 28 mm shaft diameter, a 52 mm housing diameter and a 10 mm height. Verify these dimensions against your equipment before ordering.
- What type of applications is this oil seal suitable for?
- It is used on rotating shafts of gearboxes, pumps, electric motors and similar equipment. Its Lx design is suitable for retaining lubricant and excluding contaminants in reduced axial spaces.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp or email with part number 8888 and the dimensions of your shaft and housing. Tell us the dimensions and we will quote what you need and suggest equivalents if available.