DBH 8860 radial shaft seal — 7 x 16 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8860 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8860 and any equivalents.
The DBH 8860 is a radial shaft seal built to keep lubricant in and contaminants out where a rotating shaft passes through a housing. Its Lx configuration uses a single lip with a spring. Because the profile is small, it fits equipment where mounting space is tight and shaft speeds stay moderate. MR Industrial Accessories supplies this seal line and can help you confirm the right choice.
The designation breaks down as follows: 7 mm at the shaft, 16 mm at the housing bore, and 7.00 mm overall height. The Lx code tells you the seal has one lip with a spring, so it retains oil or grease while blocking dust and particles on the rotating shaft. The 8860 number pins down the exact size in the DBH range. We verify that number against the manufacturer's data before sending a quote.
You will find a seal this size in small electric motors, gear reducers, water pumps, fans, pneumatic tools and light-duty transmission units. It also shows up in agricultural equipment, washing systems and irrigation setups, wherever oil or grease has to stay contained at the shaft exit point. In every case the seal acts as a dynamic barrier, and picking the right one keeps leaks and early wear from starting.
Before installation, inspect the shaft for burrs or splines and make sure the sealing surface is smooth. Coat the lip with the same oil or grease used in service, then press the seal in with a support tube so the spring does not distort. Keep shaft and housing eccentricity to a minimum, and seat the seal to match the 7.00 mm height. In high-vibration equipment, a seal with an extra lip or more rigidity may be worth considering.
If you need a substitute, send part number 8860 or the shaft, housing and height measurements. A photo of the old seal or the housing drawing also helps. We check that information against the series we carry and come back with compatible options.
MR Industrial Accessories offers the DBH brand within its seals and oil seals range. For equipment already in service, message us on WhatsApp with part number 8860 and we will respond with a quote. We can also assist if you need a different size or want to review another material for your application.
Dimensions
- Shaft (d)
- 7mm
- Housing bore (D)
- 16mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8860 oil seal?
- It has a 7 mm shaft diameter, 16 mm housing diameter and 7.00 mm height. These come from the designation and are checked against the manufacturer's product page before quoting. If your shaft or housing is different, we can search for an equivalent size.
- What applications is this oil seal suitable for?
- It suits compact rotating equipment such as small motors, pumps, gear reducers, fans and light-duty transmission mechanisms. Its job is to hold lubricant in and keep dust or water out where the shaft passes through the housing. Selection depends on speed, temperature and the fluid involved.
- How do I request a quote or an equivalent?
- Send part number 8860 by WhatsApp to MR Industrial Accessories, or provide the shaft, housing and height dimensions. A photo of the old seal works too. With that information we will quote you and, if needed, suggest an alternative material for your application.