DBH 8835Pol radial shaft seal — 101.57 x 125 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8835Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8835Pol and any equivalents.
A radial lip seal such as the DBH 8835Pol keeps lubricant where it belongs and keeps contamination out. It sits between a turning shaft and a stationary housing, so it fits equipment where the shaft measures roughly 101.57 mm, the bore 125 mm and the axial space 13.00 mm. Gearboxes, pumps and mid-size transmission drives are the usual homes for a seal this size.
Reading the reference helps you order the right part. The 8835Pol belongs to the DBH line, and the Lx-H-AH profile describes a sealing lip combined with a low-profile body. That low body matters when the housing does not leave much room along the shaft axis. Treat these as fixed values rather than a range: the seal is a replacement item, so a shaft, bore or height that differs from 101.57 mm, 125 mm and 13.00 mm will not seat correctly.
Seals in this size range show up on reducers, centrifugal pumps, mixers, conveyors and other machines that run continuously, and on bearing housings where the shaft passes through the wall. The job is always the same: hold the oil or grease in, block dust, water and particles from entering, and protect the bearing next to it.
Installation decides how long the seal lasts. Inspect the shaft for nicks, burrs or wear marks that could cut the lip, coat the lip before pressing it in, and drive it in square to the shaft. Clean the bore of old sealant and residue first. When you pick a replacement, the shaft size alone is not enough — bore and height must match too, and the lip profile has to suit the shaft speed and the lubricant in use.
To get a quote for 8835Pol, message us on WhatsApp with the three measurements or the code stamped on the old seal. We compare what you send against the manufacturer's data and come back with the part or an equivalent. If the seal works alongside a bearing, we can also look at the whole assembly with you.
Dimensions
- Shaft (d)
- 101.57mm
- Housing bore (D)
- 125mm
- Height (h)
- 13.00mm
- Design
- Lx-H-AH
Frequently asked questions
- What size is the DBH 8835Pol oil seal?
- Shaft 101.57 mm, housing 125 mm, height 13.00 mm. Confirm all three before ordering, since a mismatch on any one of them keeps the seal from installing properly.
- Will the 8835Pol work in place of a seal from another maker?
- It can, provided the shaft diameter, housing bore and height line up and the lip design suits your equipment. Send the original code or your measurements and we will confirm whether it is an equivalent.
- How do I ask for a quote on the DBH 8835Pol?
- Message us on WhatsApp with code 8835Pol or with the shaft, housing and height figures. We check them against the manufacturer's data and reply with the quote and any alternatives.