
DBH 8709Pol radial shaft seal — 45 x 60 x 9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8709Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8709Pol and any equivalents.
The DBH 8709Pol is a radial shaft lip seal that keeps oil or grease where it belongs on a turning shaft. With a 45 mm shaft, a 60 mm bore and a 9 mm width, it fits gearboxes, pumps and motors where lubricant retention and dirt exclusion both matter. MR Industrial Accessories supplies the DBH line and quotes by part number.
Reading the code helps you order the right part. The 8709Pol belongs to the DBH line, and the Lx-R-H layout describes how the seal is built: a sealing lip, a reinforced body and a nominal height. A spring backs the lip, and the design targets rotating shafts that run with lubrication. If any part of the nomenclature is unclear, the team can verify it against the manufacturer's data sheet before you commit to an order.
Measurements to work from: shaft 45.00 mm, housing 60.00 mm, height 9.00 mm. Check the shaft first, then the bore, and confirm the housing depth accepts the 9.00 mm width. Surfaces should be smooth and free of burrs. Coat the lip with lubricant before pressing it in, and drive it squarely with a flat tool so the spring stays seated. A worn shaft may call for a seal with an auxiliary lip.
Seals in this size range show up in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. In each case the job is the same: hold lubricant in and keep contaminants out. They also serve as a secondary closure in housings and hubs where the shaft turns continuously.
If you need an equivalent, send the code 8709Pol or your shaft and bore dimensions. Alternatives from other brands or lines can be sourced as long as the mounting dimensions match. Sharing the diameter, height, lubricant type and rotation speed helps narrow the options.
To request a quote for this seal, message MR Industrial Accessories on WhatsApp or by email with the code 8709Pol. The team replies promptly and can suggest equivalents or help you choose.
Dimensions
- Shaft (d)
- 45mm
- Housing bore (D)
- 60mm
- Height (h)
- 9.00mm
- Design
- Lx-R-H
Frequently asked questions
- What applications suit this seal?
- Rotating shafts in gearboxes, pumps, motors and power transmission equipment. It retains lubricant and blocks dust or water, and handles continuous rotation when properly lubricated.
- How do I ask for a quote or an equivalent?
- Send the code 8709Pol or your shaft and housing dimensions by WhatsApp or email. MR will quote the DBH seal and, if needed, look for an equivalent in another brand.
- What are the dimensions of the DBH 8709Pol?
- Shaft 45.00 mm, housing 60.00 mm, height 9.00 mm, as shown in the designation. If your shaft or bore differs, ask about an equivalent alternative.

