DBH 8685Vit radial shaft seal — 95 x 115 x 13

DBH 8685Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8685Vit and any equivalents.

The DBH 8685Vit is a radial lip seal designed for rotating shafts, keeping lubricant in and contaminants out. Its Lx-Bidi design features a main lip and a secondary lip that seal in both directions, so it works well where fluid can approach from either side or where tighter sealing is needed. The seal fits a 95 mm shaft, a 115 mm housing, and has a 13 mm height, making it a direct replacement for equipment with those dimensions.

This seal carries the commercial code DBH 8685Vit. The Lx-Bidi designation points to a double-lip layout: one lip does the primary sealing, the other adds a second barrier. That helps hold lubrication in and block dust, water, or particles from entering. The lip elastomer runs against the shaft with controlled interference, while the outer diameter holds the fit in the housing bore.

You will find seals of this size and style in gear cases, pumps, gear reducers, mixers, and power transmission units. In oil or grease environments, the double lip maintains sealing even with minor pressure changes or splashes. Rollers and machine shafts also use them to protect bearings and prevent leaks that can affect the workplace.

When selecting a seal, confirm shaft diameter, housing diameter, and available height. The shaft surface should be ground and hard enough to avoid early lip wear. The housing bore needs a finish that secures the outer fit without cutting the seal during installation. Use a tool that presses evenly, and lubricate the lip before sliding the shaft in.

If you need an alternative to the DBH 8685Vit, send the complete code or the dimensions 95 x 115 x 13 mm along with the design type. MR Industrial Accessories LLC can review options from other brands or from our own line when the application allows. We can also check whether housing or shaft tolerances permit a different height or diameter. The goal is to keep your equipment running without the delay of a hard-to-find part.

To request a quote, send the code 8685Vit via WhatsApp or email to MR Industrial Accessories LLC. We will reply with the replacement options that best match your equipment.