DBH 8682Pol radial shaft seal — 38 x 74 x 11
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8682Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8682Pol and any equivalents.
When a rotating assembly starts weeping oil or drawing in dust, the lip seal is often the first place to look. The DBH 8682Pol is a radial shaft seal built to keep lubricant where it belongs and to shut out the contaminants that shorten bearing and gear life. MR supplies this seal as part of its seals and oil seals range for maintenance and repair work.
Reading the designation is straightforward once you know the layout. The three figures describe the bore it sits on, the housing it presses into and how wide the seal is: shaft 38 mm, housing 74 mm, width 11.00 mm. The Mx-H-H code refers to the lip and case arrangement, a configuration intended for rotating service with oil or grease present.
Seals of this type turn up in gearboxes, pumps, electric motors, line shafts and comparable equipment. Their job is twofold: hold the lubricant inside the assembly, and keep dust, water and particles from reaching the bearings and gears behind them. That makes them a routine item in both preventive and corrective maintenance schedules.
Choosing a replacement comes down to a few inputs. Match the shaft and housing dimensions first, then factor in the lubricant in use, the rotational speed and the operating temperature. The Mx-H-H construction of the DBH 8682Pol follows a defined standard for lip profile and material. Before pressing a new seal in, confirm the shaft surface is not worn past acceptable limits and that the housing bore is clean and free of burrs.
If you are cross-referencing, send the DBH 8682Pol part number or simply the dimensions from your application and the team can point you toward a suitable equivalent. Alongside seals, MR manufactures split plummer block housings, roller chains and sheaves, and also supplies bearings, bushings, mounting tools and lubricants.
Quotes are handled by part number over WhatsApp or email, and the response is quick. If the seal is not the right fit, share the equipment details and the team will help you narrow down the correct option.
Dimensions
- Shaft (d)
- 38mm
- Housing bore (D)
- 74mm
- Height (h)
- 11.00mm
- Design
- Mx-H-H
Frequently asked questions
- What size is the DBH 8682Pol seal?
- It takes a 38 mm shaft, a 74 mm housing bore and has a width of 11.00 mm. Check these against the actual shaft and housing before installation, since the designation alone does not confirm fit.
- Where is this seal typically used?
- Gearboxes, pumps, motors and rotating shafts are the usual locations. It works with oil or grease and needs a shaft in sound condition plus a clean housing bore to seat and seal properly.
- How do I get a quote or an equivalent seal?
- Send the DBH 8682Pol part number to MR by WhatsApp or email. If you need a different size, provide the dimensions of your equipment and the team will help identify the right seal.