DBH 8661Pol radial shaft seal — 32 x 46 x 6

DBH 8661Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8661Pol and any equivalents.

The DBH 8661Pol is a radial shaft seal built for rotating shafts. Its three key measurements are a 32 mm shaft diameter, a 46 mm housing diameter and a 6.00 mm height. The Lx-R designation points to a sealing lip combined with a reinforced body, a layout that handles constant friction. The seal keeps lubricant in and keeps dust, water and particles out of gearboxes, pumps and motors. MR Industrial Accessories supplies it within its industrial seals range.

Reading the code and the numbers: 8661Pol identifies the seal, and the three figures describe shaft 32 mm, housing 46 mm, width 6.00 mm. Lx-R tells you the seal has a lip and a reinforced body. The lip rides against the shaft while the body sits press-fitted in the cavity, so oil stays inside and outside contaminants stay out. Because it wears over time, plan to swap it as soon as leakage appears.

Where this seal fits: gearboxes, reducers, centrifugal pumps, electric motors and transmission equipment. In each case it shields bearings and gears from dirt and stops lubricant loss. Fan, mixer and conveyor shafts also use it, especially where dust or moisture is present. The compact 32 mm shaft size suits tight spaces.

Installation notes: confirm the shaft measures 32 mm and the housing 46 mm, and check both for burrs or wear. Coat the lip with the same oil or grease the equipment uses, then press the seal in squarely so the lip is not damaged. The 6.00 mm height has to match the cavity depth. If the shaft shows grooves or roughness, look at a seal with an extra lip or a wear sleeve.

For a quote on an equivalent, send part number 8661Pol or the current dimensions: shaft diameter, housing and height. We can search alternatives within the DBH line or other brands we carry. If the original seal has a special design, such as a double lip or a high-temperature material, we can advise on that too, so you get the part that fits your equipment.