DBH 8617Vit radial shaft seal — 105 x 142 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8617Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8617Vit and any equivalents.
The DBH 8617Vit is a radial shaft seal that keeps lubricant where it belongs and keeps dust and moisture out of equipment with a turning shaft. It seats in the housing bore and rides on the shaft with a flexible lip. With a 105 mm shaft, a 142 mm housing bore and a 13.00 mm height, it fits gearboxes, pumps and other industrial drives that depend on dependable sealing.
This seal carries the reference DBH 8617Vit. Its build is Lx-H-AH: a sealing lip backed by a spring that keeps steady pressure against the shaft, plus an outer case that presses into the housing. The lip elastomer is made to handle constant rubbing along with the oils and greases normally found in industrial transmissions.
Seals in this size range turn up in gearboxes, centrifugal pumps, mixers, conveyors and process equipment. Their job is to hold lubricant inside the assembly and to keep abrasive particles and water out, which helps bearings and gears last. They also serve as secondary sealing in electric motors and speed reducers.
When choosing a replacement, check three things against the original part: shaft diameter, housing bore and height. The shaft surface should be clean, with no burrs or deep marks, and it helps to lubricate the lip before pressing the seal in. The Lx-H-AH design absorbs a certain amount of misalignment, but the housing needs to be sound and free of deformation.
If you need this seal or a cross-reference from another brand, send the code stamped on the part or the dimensions you measured with a caliper. The team checks that information against the data sheets of the manufacturers we carry and comes back with compatible options. Material or design variants can also be reviewed depending on the fluid and the working temperature.
To request a quote, send the code 8617Vit or the dimensions 105 x 142 x 13 mm by WhatsApp or email. We will reply with equivalent seal options for your equipment, and we can answer installation questions as well.
Dimensions
- Shaft (d)
- 105mm
- Housing bore (D)
- 142mm
- Height (h)
- 13.00mm
- Design
- Lx-H-AH
Frequently asked questions
- What are the dimensions of the DBH 8617Vit oil seal?
- Shaft 105 mm, housing bore 142 mm, height 13.00 mm. These are the figures to confirm against the original part before replacing it, and they correspond to the Lx-H-AH design.
- How do I know if this seal is compatible with my equipment?
- Measure the original seal and compare: 105 mm shaft, 142 mm housing and 13.00 mm height. Also confirm that the lip type and material suit the lubricant and the working temperature.
- Can I request an equivalent seal if I cannot get the DBH 8617Vit?
- Yes. Send the code or the dimensions by WhatsApp or email and we will look for compatible alternatives among the brands we supply, then confirm the options so you can pick what fits your equipment.