DBH 8611Pol radial shaft seal — 58 x 80 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8611Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8611Pol and any equivalents.
For rotating shaft assemblies, the DBH 8611Pol radial oil seal helps keep lubricants in and contaminants out. Its dimensions—58 mm shaft, 80 mm housing, 12.00 mm height—make it suitable for gearboxes, pumps, electric motors, and similar equipment. MR supplies this seal and can assist with selection and equivalent options.
The 8611Pol part number identifies a single-lip seal with a spring-loaded lip and rigid outer body. The code reflects the standardized size: bore for a 58 mm shaft, outer diameter to fit an 80 mm housing, and a width of 12.00 mm. Before ordering, verify these measurements against your existing housing and shaft.
This seal is commonly specified for gearboxes, centrifugal pumps, electric motors, drive shafts, and continuous process machinery. It prevents oil or grease from escaping while blocking dust and moisture. Applications include mixers, compressors, and agricultural or industrial equipment operating at moderate speeds with lubricated shafts.
For proper installation, ensure the shaft surface is ground and free of burrs, and the housing is clean and undistorted. Apply a light lubricant to the lip before mounting and use an installation tool to avoid damage. If your equipment runs under high vibration or temperature, ask about alternative materials or designs.
To request a quote, send the code 8611Pol or the dimensions of your current seal via WhatsApp. MR can check for equivalents in the same series or from other brands we carry, always matching the shaft, housing, and height. We also provide guidance if the original seal has a special design or if the housing shows wear.
Contact MR with the part number or dimensions, and we will confirm the size and available options. Our team can help you choose the right seal for your equipment and answer questions about mounting or selection.
Dimensions
- Shaft (d)
- 58mm
- Housing bore (D)
- 80mm
- Height (h)
- 12.00mm
- Design
- Lx-R-H
Frequently asked questions
- What are the dimensions of the DBH 8611Pol oil seal?
- The DBH 8611Pol seal fits a 58 mm shaft, an 80 mm housing bore, and has a height of 12.00 mm. These dimensions correspond to the 8611Pol designation and must match the shaft and housing where it will be installed.
- How do I request an equivalent to the 8611Pol oil seal?
- Send the code 8611Pol or your seal's dimensions to MR via WhatsApp. We will look for alternatives within the same series or from other brands that meet the same shaft, housing, and height specifications.
- What care should I take when mounting this oil seal?
- Lubricate the lip before mounting, ensure the shaft is ground and free of burrs, and use an installation tool to avoid damaging the seal. The housing must be clean and free of deformation to ensure proper sealing.