DBH 8603Pol radial shaft seal — 33 x 47 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8603Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8603Pol and any equivalents.
The DBH 8603Pol is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 33 mm shaft, a 47 mm housing bore, and has an 8 mm height, with an Lx-H design that combines a sealing lip and a metal case for press-fit installation. You will find it in gearboxes, pumps, motors, and power transmission drives. MR Industrial Accessories supplies this brand and helps you match the seal to your application.
This seal carries the code 8603Pol from DBH. Its dimensions are shaft 33 mm, housing 47 mm, and height 8.00 mm. The Lx-H configuration means a lip seal with a metal outer case, made to be pressed into a cylindrical housing. The elastomer lip runs against the shaft and holds lubrication in place.
Common uses include gearboxes, centrifugal pumps, electric motors, compressors, and power transmission components. In each case, the seal keeps oil or grease where it belongs and blocks dust, water, and other particles from reaching bearings and gears. Because it is a wear part, plan to replace it during preventive maintenance or as soon as you see leakage around the shaft.
Before installing a 8603Pol, confirm that your shaft and housing match the dimensions above. The shaft surface should be ground, free of burrs or deep marks, and have the right hardness and roughness so it does not damage the lip. Lubricate the lip with the same oil used in the equipment, press the seal in perpendicular to the shaft, and avoid hitting it directly. If the housing has a chamfer, check that it will not cut the elastomer.
If you are looking for an equivalent, send the code 8603Pol or your shaft and housing dimensions. MR Industrial Accessories offers options from other brands and can advise based on your application, speed, and lubricant type. The more details you provide, the more precise the recommendation.
To request a quote for the DBH 8603Pol seal, message us on WhatsApp with the code. We will respond with the technical information you need to keep your maintenance moving.
Dimensions
- Shaft (d)
- 33mm
- Housing bore (D)
- 47mm
- Height (h)
- 8.00mm
- Design
- Lx-H
Frequently asked questions
- What are the dimensions of the DBH 8603Pol seal?
- The DBH 8603Pol seal has a shaft diameter of 33 mm, a housing diameter of 47 mm, and a height of 8.00 mm. These are the standard dimensions to verify before replacing the seal in your equipment.
- What applications is this seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, electric motors, and power transmission equipment. Its role is to retain lubricant and keep contaminants out. It suits applications with permanent lubrication and moderate speeds.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with the code 8603Pol or the dimensions of your shaft and housing. At MR Industrial Accessories we help you find the right seal for your application and send you the corresponding quote.