DBH 8533Pol radial shaft seal — 60 x 82 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8533Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8533Pol and any equivalents.
Where a rotating shaft leaves a gearbox, pump or motor housing, the DBH 8533Pol lip seal keeps lubricant in and contamination out. Its code tells you the fit: the shaft runs at 60 mm, the bore takes 82 mm and the seal is 12.00 mm tall, in the Lx-H configuration. The lip rides on the shaft while the outer case presses into the housing, so the assembly holds both a dynamic and a static seal.
Reading the designation is the quickest way to check a replacement. The 8533Pol code pairs with shaft diameter 60 mm, housing diameter 82 mm and height 12.00 mm. Lx-H describes a seal built with a sealing lip and a mounting body for rotating shafts lubricated from inside the housing. One face works against the moving shaft; the other seats in the bore.
You will find this size in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. Whatever the machine, the job is the same: hold oil or grease in and keep dust, water and particles out. Treat it as a wear part. Leakage at the shaft or grit working into the lubricant are the usual signs that it is time to replace it.
Before ordering, measure the shaft, the housing bore and the height and compare them with the figures above. Look closely at the shaft surface as well, since scratches or wear speed up lip failure. Lubricate the lip at installation and press on the outer diameter with a proper tool rather than striking the seal. If the shaft runs with play or eccentricity, ask about another sealing option.
For an equivalent, send the code 8533Pol with your shaft, housing and height measurements and the fluid being sealed. That lets us search the DBH line or other brands we supply. Where the space allows, design and material variants can also be reviewed against your temperature and speed.
MR Industrial Accessories LLC supplies the DBH brand within its seals and oil seals range. To request a quote for this size or an alternative, message us on WhatsApp or by email with the code 8533Pol and your equipment dimensions, and our team will reply with the option that fits your application.
Dimensions
- Shaft (d)
- 60mm
- Housing bore (D)
- 82mm
- Height (h)
- 12.00mm
- Design
- Lx-H
Frequently asked questions
- What size is the DBH 8533Pol oil seal?
- It fits a 60 mm shaft in an 82 mm housing bore, with a 12.00 mm height, and it uses the Lx-H design. Compare those three figures with your equipment before replacing it.
- How can I confirm this seal fits my machine?
- Check that the shaft measures 60 mm, the bore 82 mm and the height 12.00 mm, and review the shaft surface and the lubricant used. If anything is unclear, send us the measurements and a photo of the housing on WhatsApp.
- Can I ask for an equivalent size?
- Yes. Send the code 8533Pol and your equipment dimensions on WhatsApp or by email. We then look for an option in the DBH line or from other brands we supply, taking the fluid and operating conditions into account.