DBH 8525Pol radial shaft seal — 34 x 48 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8525Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8525Pol and any equivalents.
The DBH 8525Pol is a radial shaft seal that keeps lubricant where it belongs and blocks dust, water, and other contaminants from reaching the bearing. Its dimensions are 34 mm shaft, 48 mm housing, and 7.00 mm height. You will find it in pumps, electric motors, gearboxes, and other rotating equipment. MR Industrial Accessories supplies this brand and can help you match the right seal to your application.
This oil seal carries the DBH brand and the part number 8525Pol. The size is given as shaft diameter (d) 34 mm, housing diameter (D) 48 mm, and height (h) 7.00 mm. The Lx-R-H designation describes a sealing lip, a reinforced body, and a retaining spring. The seal combines elastomers with a metal case, which gives it the wear resistance and oil compatibility needed in everyday industrial service.
You will typically find this seal on centrifugal pumps, electric motors, gearboxes, compressors, and transmission equipment. In each case it seals the point where the shaft passes through the housing, protecting both the bearing and the lubricant. Because a worn seal lets oil escape and contaminants enter, it is a key item in preventive maintenance; ignoring a leak often leads to damage in other components.
Correct installation starts with clean, burr-free shaft and housing surfaces. Apply a light film of the service oil or grease to the lip before fitting the seal. Press on the metal case only, never on the lip. Confirm that the shaft and housing dimensions match the seal size. If the shaft shows wear, consider a seal with an additional lip or a wear sleeve.
If you need an equivalent from another brand, we can help. Send us the shaft diameter, housing diameter, and height you require, along with the application and operating conditions such as temperature, speed, and the fluid being retained. With that information we can locate a seal or an alternative part number that does the same job.
To request a quote for the DBH 8525Pol or to ask about other sizes, contact us on WhatsApp. Send the part number or the dimensions and our team will get back to you promptly with technical guidance.
Dimensions
- Shaft (d)
- 34mm
- Housing bore (D)
- 48mm
- Height (h)
- 7.00mm
- Design
- Lx-R-H
Frequently asked questions
- What are the dimensions of the DBH 8525Pol oil seal?
- The DBH 8525Pol oil seal has a shaft diameter of 34 mm, a housing diameter of 48 mm, and a height of 7.00 mm. These are the dimensions to verify before ordering.
- What applications is this oil seal suitable for?
- It is used on rotating shafts in pumps, motors, gearboxes, and industrial equipment. It retains lubricant and keeps contaminants out, and works with common oils and greases.
- How do I request an equivalent size or a similar oil seal?
- Write to us on WhatsApp with the shaft, housing, and height dimensions you need, or with the part number of the original oil seal. We will help you find an equivalent for your application.