DBH 8466 radial shaft seal — 36 x 52 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8466 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8466 and any equivalents.
The DBH 8466 is a radial shaft seal built to keep lubricant where it belongs and to block dust, water and other contaminants from reaching the bearing. It measures 36.00 mm at the shaft, 52.00 mm at the housing bore and 10.00 mm in height, and it carries the Lx design. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your equipment.
The code breaks down into two parts: DBH identifies the brand, and 8466 is the reference for this particular seal. The Lx designation describes a sealing lip backed by a spring, so the lip stays in contact with the shaft as it turns. The seal is pressed into the housing bore with the lip turned toward the fluid it has to hold back.
Seals in this size range turn up in gearboxes and reducers, centrifugal pumps, electric motors, drive shafts and process equipment. Whatever the machine, the job is the same: hold oil or grease inside the assembly and keep contaminants out of the bearing area. Treat it as a wear part and replace it once leakage or unusual noise shows up around the seal.
Installation is where most seals are lost. Inspect the shaft for burrs, scratches or a worn track before fitting, coat the lip with lubricant, and drive the seal in with a tool that presses on the outer diameter rather than on the lip. Rotation speed, operating temperature and the fluid being sealed all affect how the seal performs. A shaft that is already worn may call for a seal with an auxiliary lip.
If you need a different size or a substitute, send the reference 8466 or the three dimensions you measured, plus a photo of the seal you are replacing. With that we can check other options in the same brand or from the other manufacturers we carry, and tell you whether the mounting space allows a different design or material.
For a quote on the DBH 8466, message us on WhatsApp with the code. If you are working through a maintenance list, send the whole list and we will help you identify each item.
Dimensions
- Shaft (d)
- 36mm
- Housing bore (D)
- 52mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- How do I check that this seal fits my machine?
- Measure the old seal at the shaft, at the housing bore and across its height, and compare those three figures with 36.00 mm, 52.00 mm and 10.00 mm. Also confirm the fluid type and the working temperature. If everything lines up, the seal fits. If not, send us your equipment data and we will review it.
- Can I get another size or an equivalent seal?
- Yes. We carry other seal sizes and brands. Send the reference 8466 or the dimensions you need and we will come back with alternatives, including an equivalent when the original design is no longer made.
- What are the dimensions of the DBH 8466 oil seal?
- Shaft 36.00 mm, housing 52.00 mm, height 10.00 mm. Those are the three values to verify on your equipment before you order.