DBH 8455 radial shaft seal — 35 x 72 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8455 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8455 and any equivalents.
The DBH 8455 is a radial shaft seal built for a 35 mm shaft, a 72 mm housing bore and a 12 mm height. It keeps lubricant where it belongs and blocks dust, water and particles from reaching bearings and bushings. You will find this seal in gearboxes, pumps, motors and transmission equipment. MR Industrial Accessories supplies this brand so you can match the seal to the assembly.
The code 8455 stands for one specific set of dimensions: shaft 35 mm, housing 72 mm, height 12.00 mm. The Lx-H design refers to the lip configuration. Before you install a replacement, measure the shaft and the housing bore and compare them with these figures. The lip runs against the shaft and holds tight while the shaft turns.
Seals of this type appear in gearboxes, centrifugal pumps, electric motors, compressors, spindles and power transmission units. They do two jobs at once: keep oil or grease inside and keep contaminants outside. Where dust, chips or moisture are present, a seal in good condition protects bearings and bushings and helps you avoid leaks and unplanned stops.
When you choose a seal, work from the shaft diameter, housing diameter and height. Also check rotation speed, operating temperature and the lubricant in use. The Lx-H design may include an auxiliary lip or extra dust protection. In dirty conditions, confirm that the seal has the right exclusion lip. Install it with tools that do not cut or distort the lip.
If you need an equivalent, send part number 8455 or the three dimensions. With that information we can check alternatives in the same DBH brand or in other brands we carry, and tell you whether the mounting space allows any variation. Replacing with the same dimensions and sealing characteristics is the safest route.
To request a quote for the DBH 8455 oil seal, send the part number by WhatsApp or email to MR Industrial Accessories. We reply promptly and can suggest equivalents or help you choose.
Dimensions
- Shaft (d)
- 35mm
- Housing bore (D)
- 72mm
- Height (h)
- 12.00mm
- Design
- Lx-H
Frequently asked questions
- What are the dimensions of the DBH 8455 oil seal?
- Shaft 35 mm, housing 72 mm, height 12.00 mm. These three figures define the 8455 designation and must match the shaft and housing bore where the seal is mounted.
- How do I request an oil seal equivalent to the 8455?
- Send part number 8455 or the shaft, housing and height dimensions by WhatsApp or email. We can look for alternatives in the same DBH brand or in other brands we carry, keeping the dimensions and sealing type.
- What applications does this radial shaft seal have?
- Gearboxes, pumps, electric motors, compressors and transmission equipment. It retains lubricant and keeps contaminants out, protecting bearings, bushings and shafts.