DBH 8444 radial shaft seal — 110 x 150 x 15
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8444 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8444 and any equivalents.
The DBH 8444 is a radial shaft seal that sits in a housing bore and works against a rotating shaft, holding lubricant in and keeping dust, water and other particles out. Its dimensions are shaft 110 mm, housing 150 mm and height 15.00 mm, in Kx design. MR Industrial Accessories supplies this brand and can help you confirm the size or locate a substitute.
The part is identified by the designation 8444. Four values define it: shaft diameter 110 mm, housing diameter 150 mm, height 15.00 mm and Kx design. Kx refers to a lip configuration with a defined mounting geometry. It belongs to the seals and oil seals group, the parts used on rotating shafts wherever oil or grease has to stay inside the assembly.
Typical locations include gearboxes, pumps, electric motors, rollers and power transmission equipment, as well as machine tools, conveyors and agitation systems. In each case the seal keeps lubricant from escaping and shields bearings or bushings from contaminants. Treat it as a wear part: once leaks or unusual noise appear around the sealing area, replacement is due.
During installation, check that the shaft and housing measurements match the values above. Press the seal in straight, without hammering that could distort the lip, and keep the spring on the lubricant side. Coat the lip with the same oil or grease the equipment runs on before fitting it. A shaft with wear or grooves may call for a different design. Speed, temperature and fluid type all influence the choice, so have those details ready.
For an equivalent, give us the code 8444 or the dimensions of the part you are replacing. With that information we can search a seal from another brand or series that does the same job, and advise you if the housing or shaft tolerances differ from the standard.
To request a quote for the DBH 8444 oil seal, send the code 8444 by WhatsApp or email to MR Industrial Accessories. If the size or design is unclear, include a photo of the old part or the shaft and housing measurements so we can confirm whether this item fits or a variant is needed.
Dimensions
- Shaft (d)
- 110mm
- Housing bore (D)
- 150mm
- Height (h)
- 15.00mm
- Design
- Kx
Frequently asked questions
- What are the dimensions of the DBH 8444 oil seal?
- Shaft 110 mm, housing 150 mm and height 15.00 mm, in Kx design. These are the values to check against your equipment before mounting.
- How do I know if this oil seal replaces the one I have installed?
- Compare the three dimensions: shaft, housing and height. If they read 110, 150 and 15 mm and the Kx design suits your application, it is a direct replacement. If any value differs, ask us about an alternative.
- Can I request a size other than the one published?
- Yes. Send the shaft diameter, housing diameter or height you need by WhatsApp or email and we can look for a seal from the same brand or another that fits your equipment, or evaluate a different design.