DBH 8379/85 radial shaft seal — 22 x 36 x 10/15

DBH 8379/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8379/85 and any equivalents.

The DBH 8379/85 is a radial shaft seal built to keep lubricant where it belongs and keep contamination out of rotating assemblies. It fits a 22 mm shaft and a 36 mm housing bore, with a 10/15 mm height, and follows the A 090 configuration: one lip with a spring. MR Industrial Accessories LLC supplies this brand to maintenance and purchasing teams that need the correct sealing part the first time.

Reading the code starts with the dimensions. Shaft 22 mm, housing 36 mm, height 10/15 mm. The A 090 designation tells you it is a single-lip seal with a spring, a common choice for rotating shafts. That combination seats into housings, covers and bearing supports with a defined fit. Its job on the machine is straightforward: hold oil or grease in the assembly and block dust, water and particles that would otherwise reach bearings and gears.

You will find seals like this one in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. In each case the lip runs against a turning shaft at moderate peripheral speeds, with a thin film of lubricant keeping the lip alive. Agricultural machinery, process lines and conveying systems are typical homes for it, since all of them depend on a barrier that stops lubricant loss and contamination at the same time.

Installation decides how long the seal lasts. Inspect the shaft first and remove burrs, nicks or marks that could cut the lip. Coat the lip with the same oil or grease the equipment uses. Drive the seal into the housing with a press or a proper installation tool, keeping force even on the outer ring and never on the lip. The seal should sit square to the shaft, flush or slightly recessed as the housing design calls for. A worn shaft can be handled with a repair sleeve or a different size.

If you are looking for a replacement or an equivalent, send the code 8379/85 or the dimensions 22x36x10/15 and the team can point you to options from the same brand or other compatible ones, keeping dimensions and design type in mind. Variants in height or diameter can also be reviewed when the application calls for them. Quotes are handled by part number through WhatsApp or email.