DBH 8350/85 radial shaft seal — 27 x 38 x 7

DBH 8350/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8350/85 and any equivalents.

For rotating shafts, the DBH 8350/85 radial shaft seal keeps lubricant in and contaminants out. It mounts in a cylindrical housing and is a wear part you replace during scheduled maintenance on pumps, motors, gearboxes and transmission equipment, protecting bearings from dust and water. The code tells you the three key measurements: 27 mm shaft, 38 mm bore, 7 mm height. MR Industrial Accessories supplies this brand.

This seal uses the Lx design: a sealing lip combined with a metal outer case that presses into the housing. The numbers to check are shaft diameter 27 mm, housing bore 38 mm and height 7.00 mm. Those three values determine whether the part fits your shaft and cavity. If any measurement differs, confirm against the manufacturer's data before you install it.

You will find the DBH 8350/85 in centrifugal pumps, electric motors, gear reducers, gearboxes, mixers and conveyors. It suits shafts turning at moderate speed and areas where dust, chips or humidity are present. It works together with a bearing or bushing, holding oil or grease in place and blocking dirt so the assembly lasts longer.

Selection starts with the shaft diameter, housing bore and height. Then match the lip type and material to the fluid and operating temperature. During installation, keep the shaft clean and free of burrs, lubricate the lip, and use a tool that will not damage it. Shaft eccentricity and surface finish also affect how long the seal lasts; a scratched shaft or too much play will shorten the life of the new part.

If you need an alternative, send the part number 8350/85 plus the shaft, bore and height dimensions, and a photo of the old seal if possible. We will check the DBH line or another compatible option. We can also help if the Lx design is not right for your equipment and a different lip style or material is required.

To request a quote for the DBH 8350/85 oil seal, contact MR Industrial Accessories on WhatsApp with the part number and the quantity you need. We work with seals and oil seals from various brands and can source the part for your equipment. Our team helps you confirm the correct designation before you buy.