DBH 8342 radial shaft seal — 35 x 52 x 9

DBH 8342 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8342 and any equivalents.

The DBH 8342 is a radial shaft seal that fits between a rotating shaft and a stationary housing to keep lubricant in and contaminants out. Its code describes a seal for a 35 mm shaft, a 52 mm housing bore and a 9 mm height, with an Lx design. You will find it in gearboxes, pumps, motors and other power transmission equipment where the shaft passes through a housing.

This seal carries the designation DBH 8342 and measures 35 mm at the shaft, 52 mm at the housing and 9.00 mm in height. The Lx design means a single lip with a spring, intended for lubricated rotating shafts. The lip rides on the shaft while the outer diameter is pressed into the housing bore.

Common uses for a seal of these dimensions include gearboxes, centrifugal pumps, electric motors, rollers and belt or chain drive systems. In each case it keeps oil or grease inside the assembly and blocks dust, water or particles from entering. It also suits process equipment with continuous shaft rotation where a simple, replaceable sealing barrier is needed.

Selection depends on three measurements: shaft diameter, housing bore and available height. Also consider rotation speed, operating temperature and the lubricant in use, since these affect lip life. During installation, clean the shaft, lubricate the lip with the same oil as the equipment and press the seal in perpendicular to the shaft. Do not strike the lip, and make sure the spring faces the fluid side.

If you need an equivalent to the DBH 8342, send the full part number, the shaft, housing and height dimensions, and a photo of the old part if available. With that information we can check the brands we supply or suggest a seal that performs the same function.

To request a quote for the DBH 8342, contact us on WhatsApp or by email with the part number and dimensions. Our team replies promptly and can help you confirm the right option for your application.