DBH 8332/85 radial shaft seal — 33 x 46 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8332/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8332/85 and any equivalents.
The DBH 8332/85 is a radial shaft seal with a single lip and spring, designed to keep lubricant in and contaminants out of rotating equipment. Its dimensions are 33 mm shaft, 46 mm housing, and 8 mm width. You'll find this seal in gearboxes, pumps, motors, and transmissions. MR Industrial Accessories supplies the DBH brand and can help you select the right variant for your lubricant, speed, and operating conditions.
The 8332/85 code indicates a 33 mm shaft, 46 mm housing, and 8.00 mm height. The Lx design has one sealing lip with a spring, suitable for oil or grease lubrication. The lip presses against the shaft while the outer diameter fits into the housing, keeping the seal centered and secure.
Common uses include gearboxes, centrifugal pumps, electric motors, compressors, and power transmission equipment. The seal retains lubricant and blocks dust, chips, and water. As a wear part, it should be checked if you notice oil leaks, bearing noise, or dirt around the shaft.
During installation, ensure the shaft is free of burrs and the sealing surface is clean and lubricated. Press the seal in perpendicular to the housing without hitting the lip. When replacing, note the shaft diameter, housing bore, height, lubricant type, and rotation speed. A worn shaft may need a wear sleeve before installing the new seal.
To request a quote for the 8332/85 or a seal with the same dimensions, send us the shaft, housing, and height measurements. A photo of the old part and the housing also helps. We verify the data to offer the correct variant, whether it's the same Lx design or another compatible option.
Contact us on WhatsApp with the code 8332/85 and the quantity you need. If you're unsure about the size or design, our team can confirm the part before you order. We also work with other brands to meet your maintenance requirements.
Dimensions
- Shaft (d)
- 33mm
- Housing bore (D)
- 46mm
- Height (h)
- 8.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8332/85 oil seal?
- It has a 33 mm shaft, 46 mm housing, and 8.00 mm height. These are the nominal dimensions and match the 8332/85 designation. If your measurements differ, consult our technical team.
- What applications is this oil seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, electric motors, and transmission equipment. It retains oil or grease and blocks dust and water. As a wear part, inspect it if leaks or abnormal noises appear.
- How do I request a quote or an equivalent?
- Send a WhatsApp message with the code 8332/85 and the quantity. If you're unsure about the size, provide the shaft, housing, and height diameters of the old seal, or a photo. We'll help you confirm the part before quoting.