DBH 8298 radial shaft seal — 15 x 32 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8298 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8298 and any equivalents.
The DBH 8298 is a radial shaft seal built to keep lubricant in and contaminants out of rotating assemblies. With an Lx design and a 15 mm shaft, 32 mm housing and 7 mm height, it fits small-diameter shafts where axial room is tight. You will find it in pumps, electric motors, gearboxes and light-duty transmissions.
This seal carries the designation 8298 and the code DBH. Its three key measurements are shaft 15.00 mm, housing 32.00 mm and height 7.00 mm. The Lx design means a single lip with a metal case. The case presses into the housing bore while the lip rides on the shaft, and the 7 mm height sets how much cavity width the seal takes up.
Small centrifugal pumps, low-power electric motors, compact gearboxes, machine tool spindles, and belt or chain drives are common homes for a seal this size. You will also see it in washing equipment, agitators and mixers exposed to water or dust. In every case the seal shields the bearings and the lubricant from the outside and helps hold internal pressure.
Before installing, confirm the shaft is clean and free of burrs or marks, and that the sealing surface has the right hardness and roughness. Lubricate the lip, then drive the seal in with a tube that presses on the case, never on the lip. Peripheral speed, operating temperature and the fluid being retained all affect selection. If the shaft is worn, an auxiliary lip may be the better choice.
For an equivalent to the DBH 8298, send the part number, the shaft, housing and height dimensions, and a photo of the old seal. We use that to search other brands. The same seal type is also offered in different material grades to match the fluid and temperature. The goal is to keep your equipment from sitting idle over a seal.
To request a quote for the DBH 8298 or an equivalent, message us on WhatsApp or email with the part number and the quantity you need. We reply with the options and technical data so you can confirm the application.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 32mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8298 oil seal?
- Shaft 15.00 mm, housing 32.00 mm and height 7.00 mm, matching designation 8298 and the Lx design. Always compare against the original seal before replacing it.
- What type of applications is this oil seal suitable for?
- It suits rotating shafts in pumps, electric motors, gearboxes and light-duty transmissions. It retains lubricant and blocks dust or water, and works where axial space is limited and the shaft is 15 mm.
- How do I request a quote or an equivalent?
- Send part number 8298 on WhatsApp to MR, along with the dimensions and a photo if possible. That lets us offer the DBH oil seal or a suitable alternative.